[PATCH v3 2/2] PCI: dwc: visconti: Remove cpu_addr_fix() after DTS fix ranges

[Bjorn Helgaas]

In subject, s/PCI: dwc: visconti:/PCI: visconti:/ to match previous
history.

On Mon, Sep 08, 2025 at 11:34:08AM +0900, Nobuhiro Iwamatsu wrote:
> From: Frank Li <Frank.Li at nxp.com>
> 
> Remove cpu_addr_fix() since it is no longer needed. The PCIe ranges
> property has been corrected in the DTS, and the DesignWare common code now
> handles address translation properly without requiring this workaround.

As Mani pointed out, the driver has to continue working correctly with
any old DTs in the field.

> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90 at mail.toshiba>
> 
> ---
> v3:
>   Add pci->use_parent_dt_ranges fixes.
>   Update Signed-off-by address, because my company email address haschanged.
> 
> v2:
>   No Update.
> ---
>  drivers/pci/controller/dwc/pcie-visconti.c | 15 ++-------------
>  1 file changed, 2 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-visconti.c b/drivers/pci/controller/dwc/pcie-visconti.c
> index cdeac6177143c..d8765e57147af 100644
> --- a/drivers/pci/controller/dwc/pcie-visconti.c
> +++ b/drivers/pci/controller/dwc/pcie-visconti.c
> @@ -171,20 +171,7 @@ static void visconti_pcie_stop_link(struct dw_pcie *pci)
>  	visconti_mpu_writel(pcie, val | MPU_MP_EN_DISABLE, PCIE_MPU_REG_MP_EN);
>  }
>  
> -/*
> - * In this SoC specification, the CPU bus outputs the offset value from
> - * 0x40000000 to the PCIe bus, so 0x40000000 is subtracted from the CPU
> - * bus address. This 0x40000000 is also based on io_base from DT.
> - */
> -static u64 visconti_pcie_cpu_addr_fixup(struct dw_pcie *pci, u64 cpu_addr)
> -{
> -	struct dw_pcie_rp *pp = &pci->pp;
> -
> -	return cpu_addr & ~pp->io_base;
> -}
> -
>  static const struct dw_pcie_ops dw_pcie_ops = {
> -	.cpu_addr_fixup = visconti_pcie_cpu_addr_fixup,
>  	.link_up = visconti_pcie_link_up,
>  	.start_link = visconti_pcie_start_link,
>  	.stop_link = visconti_pcie_stop_link,
> @@ -310,6 +297,8 @@ static int visconti_pcie_probe(struct platform_device *pdev)
>  
>  	platform_set_drvdata(pdev, pcie);
>  
> +	pci->use_parent_dt_ranges = true;
> +
>  	return visconti_add_pcie_port(pcie, pdev);
>  }
>  
> -- 
> 2.51.0
> 
>