[PATCH v2 1/2] arm64: dts: ti: k3-am62p/j722s: Remove HS400 support from common

[Andrew Davis]

On 9/8/25 12:38 PM, Judith Mendez wrote:
> Since eMMC HS400 has been descoped for J722s due to errata i2478 [0]
> and is supported for AM62Px device, remove eMMC HS400 support from
> common-main.dtsi and include only in am62p-main.dtsi.
> 
> [0] https://www.ti.com/lit/pdf/sprz575
> Signed-off-by: Judith Mendez <jm at ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi | 3 ---
>   arch/arm64/boot/dts/ti/k3-am62p-main.dtsi              | 6 ++++++
>   2 files changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> index 4427b12058a6..0c05bcf1d776 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> @@ -576,15 +576,12 @@ sdhci0: mmc at fa10000 {
>   		bus-width = <8>;
>   		mmc-ddr-1_8v;
>   		mmc-hs200-1_8v;
> -		mmc-hs400-1_8v;
>   		ti,clkbuf-sel = <0x7>;
> -		ti,strobe-sel = <0x77>;
>   		ti,trm-icp = <0x8>;
>   		ti,otap-del-sel-legacy = <0x1>;
>   		ti,otap-del-sel-mmc-hs = <0x1>;
>   		ti,otap-del-sel-ddr52 = <0x6>;
>   		ti,otap-del-sel-hs200 = <0x8>;
> -		ti,otap-del-sel-hs400 = <0x5>;
>   		ti,itap-del-sel-legacy = <0x10>;
>   		ti,itap-del-sel-mmc-hs = <0xa>;
>   		ti,itap-del-sel-ddr52 = <0x3>;
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> index 6aea9d3f134e..90afe21e972b 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> @@ -31,6 +31,12 @@ usb1: usb at 31100000 {
>   			snps,usb2-lpm-disable;
>   		};
>   	};
> +
> +	sdhci0: mmc at fa10000 {

The node already has a label where it is defined, so you could just use:

&sdhci0 {
    ...

here at the base level, and not have it inside cbass_main.

Andrew

> +		mmc-hs400-1_8v;
> +		ti,strobe-sel = <0x77>;
> +		ti,otap-del-sel-hs400 = <0x5>;
> +	};
>   };
>   
>   &oc_sram {