[PATCH] pinctrl: airoha: fix wrong MDIO function bitmaks

[Andrew Lunn]

On Mon, Sep 08, 2025 at 01:37:19PM +0200, Christian Marangi wrote:
> With further testing with an attached Aeonsemi it was discovered that
> the pinctrl MDIO function applied the wrong bitmask. The error was
> probably caused by the confusing documentation related to these bits.
> 
> Inspecting what the bootloader actually configure, the SGMII_MDIO_MODE
> is never actually set but instead it's set force enable to the 2 GPIO
> (gpio 1-2) for MDC and MDIO pin.

Is the MDIO bus implemented using the GPIO bitbanging driver?

	Andrew