[PATCH] ARM: dts: imx6sll: Use 'dma-names'

[Fabio Estevam]

'dma-name' is not a valid property and causes the following dt-schema
warning:

dma-name: b'rx\x00tx\x00' is not of type 'object', 'integer', 'array', 'boolean', 'null'

Fix it by using 'dma-names' instead.

Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
 arch/arm/boot/dts/nxp/imx/imx6sll.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
index 8c5ca4f9b87f..704870e8c10c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
@@ -309,7 +309,7 @@ uart3: serial at 2034000 {
 					reg = <0x02034000 0x4000>;
 					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
-					dma-name = "rx", "tx";
+					dma-names = "rx", "tx";
 					clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
 						 <&clks IMX6SLL_CLK_UART3_SERIAL>;
 					clock-names = "ipg", "per";
-- 
2.34.1