[PATCH] ARM: dts: sti: remove dangling stih407-clock file

[Raphael Gallais-Pou]

Following the removal of B2120 board support, the st/stih407-clock.dtsi
file has been left unused.  Remove it.

Fixes: dee546e1adef ("ARM: sti: drop B2120 board support")
Signed-off-by: Raphael Gallais-Pou <rgallaispou at gmail.com>
---
 arch/arm/boot/dts/st/stih407-clock.dtsi | 210 --------------------------------
 1 file changed, 210 deletions(-)

diff --git a/arch/arm/boot/dts/st/stih407-clock.dtsi b/arch/arm/boot/dts/st/stih407-clock.dtsi
deleted file mode 100644
index 350bcfcf498bc410ebdb4fd00f2e1ea496a9c8be..0000000000000000000000000000000000000000
--- a/arch/arm/boot/dts/st/stih407-clock.dtsi
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics R&D Limited
- */
-#include <dt-bindings/clock/stih407-clks.h>
-/ {
-	/*
-	 * Fixed 30MHz oscillator inputs to SoC
-	 */
-	clk_sysin: clk-sysin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <30000000>;
-	};
-
-	clk_tmdsout_hdmi: clk-tmdsout-hdmi {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * A9 PLL.
-		 */
-		clockgen-a9 at 92b0000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x92b0000 0x10000>;
-
-			clockgen_a9_pll: clockgen-a9-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih407-clkgen-plla9";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_m_a9: clk-m-a9 {
-				#clock-cells = <0>;
-				compatible = "st,stih407-clkgen-a9-mux";
-
-				clocks = <&clockgen_a9_pll 0>,
-					 <&clockgen_a9_pll 0>,
-					 <&clk_s_c0_flexgen 13>,
-					 <&clk_m_a9_ext2f_div2>;
-
-				/*
-				 * ARM Peripheral clock for timers
-				 */
-				arm_periph_clk: clk-m-a9-periphs {
-					#clock-cells = <0>;
-					compatible = "fixed-factor-clock";
-
-					clocks = <&clk_m_a9>;
-					clock-div = <2>;
-					clock-mult = <1>;
-				};
-			};
-		};
-
-		clockgen-a at 90ff000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x90ff000 0x1000>;
-
-			clk_s_a0_pll: clk-s-a0-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0-a0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen", "st,flexgen-stih407-a0";
-
-				#clock-cells = <1>;
-
-				clocks = <&clk_s_a0_pll 0>,
-					 <&clk_sysin>;
-			};
-		};
-
-		clk_s_c0: clockgen-c at 9103000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9103000 0x1000>;
-
-			clk_s_c0_pll0: clk-s-c0-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0-c0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_c0_pll1: clk-s-c0-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1-c0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_c0_quadfs: clk-s-c0-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-pll";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_c0_flexgen: clk-s-c0-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-c0";
-
-				clocks = <&clk_s_c0_pll0 0>,
-					 <&clk_s_c0_pll1 0>,
-					 <&clk_s_c0_quadfs 0>,
-					 <&clk_s_c0_quadfs 1>,
-					 <&clk_s_c0_quadfs 2>,
-					 <&clk_s_c0_quadfs 3>,
-					 <&clk_sysin>;
-
-				/*
-				 * ARM Peripheral clock for timers
-				 */
-				clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
-					#clock-cells = <0>;
-					compatible = "fixed-factor-clock";
-
-					clocks = <&clk_s_c0_flexgen 13>;
-
-					clock-output-names = "clk-m-a9-ext2f-div2";
-
-					clock-div = <2>;
-					clock-mult = <1>;
-				};
-			};
-		};
-
-		clockgen-d0 at 9104000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9104000 0x1000>;
-
-			clk_s_d0_quadfs: clk-s-d0-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-d0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_d0_flexgen: clk-s-d0-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-d0";
-
-				clocks = <&clk_s_d0_quadfs 0>,
-					 <&clk_s_d0_quadfs 1>,
-					 <&clk_s_d0_quadfs 2>,
-					 <&clk_s_d0_quadfs 3>,
-					 <&clk_sysin>;
-			};
-		};
-
-		clockgen-d2 at 9106000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9106000 0x1000>;
-
-			clk_s_d2_quadfs: clk-s-d2-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-d2";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_d2_flexgen: clk-s-d2-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-d2";
-
-				clocks = <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>,
-					 <&clk_s_d2_quadfs 2>,
-					 <&clk_s_d2_quadfs 3>,
-					 <&clk_sysin>,
-					 <&clk_sysin>,
-					 <&clk_tmdsout_hdmi>;
-			};
-		};
-
-		clockgen-d3 at 9107000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9107000 0x1000>;
-
-			clk_s_d3_quadfs: clk-s-d3-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-d3";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_d3_flexgen: clk-s-d3-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-d3";
-
-				clocks = <&clk_s_d3_quadfs 0>,
-					 <&clk_s_d3_quadfs 1>,
-					 <&clk_s_d3_quadfs 2>,
-					 <&clk_s_d3_quadfs 3>,
-					 <&clk_sysin>;
-			};
-		};
-	};
-};

---
base-commit: be5d4872e528796df9d7425f2bd9b3893eb3a42c
change-id: 20250907-master-bb115f5b67ad

Best regards,
-- 
Raphael Gallais-Pou <rgallaispou at gmail.com>