[PATCH 4/9] arm64: dts: marvell: pxa1908: Add PWMs

[Duje Mihanović]

The SoC has 4 onboard PWMs. Add a node for each of them.

Signed-off-by: Duje Mihanović <duje at dujemihanovic.xyz>
---
 arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi | 32 ++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi
index cf2b9109688ce560eec8a1397251ead68d78a239..61498fd75d1dcaf0d068943c1ac14d3e5a7ca9ae 100644
--- a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi
+++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi
@@ -195,6 +195,38 @@ gpio at 100 {
 				};
 			};
 
+			pwm0: pwm at 1a000 {
+				compatible = "marvell,pxa250-pwm";
+				reg = <0x1a000 0x10>;
+				clocks = <&apbc PXA1908_CLK_PWM0>;
+				#pwm-cells = <1>;
+				status = "disabled";
+			};
+
+			pwm1: pwm at 1a400 {
+				compatible = "marvell,pxa250-pwm";
+				reg = <0x1a400 0x10>;
+				clocks = <&apbc PXA1908_CLK_PWM1>;
+				#pwm-cells = <1>;
+				status = "disabled";
+			};
+
+			pwm2: pwm at 1a800 {
+				compatible = "marvell,pxa250-pwm";
+				reg = <0x1a800 0x10>;
+				clocks = <&apbc PXA1908_CLK_PWM2>;
+				#pwm-cells = <1>;
+				status = "disabled";
+			};
+
+			pwm3: pwm at 1ac00 {
+				compatible = "marvell,pxa250-pwm";
+				reg = <0x1ac00 0x10>;
+				clocks = <&apbc PXA1908_CLK_PWM3>;
+				#pwm-cells = <1>;
+				status = "disabled";
+			};
+
 			pmx: pinmux at 1e000 {
 				compatible = "marvell,pxa1908-padconf", "pinconf-single";
 				reg = <0x1e000 0x330>;

-- 
2.51.0