[PATCH] regulator: dt-bindings: rpi-panel: Split 7" Raspberry Pi 720x1280 v2 binding

[Marek Vasut]

On 9/5/25 9:03 PM, Conor Dooley wrote:
> On Fri, Sep 05, 2025 at 08:55:16PM +0200, Marek Vasut wrote:
>> On 9/5/25 8:46 PM, Conor Dooley wrote:
>>
>> Hi,
>>
>>>> +examples:
>>>> +  - |
>>>> +    i2c {
>>>> +      #address-cells = <1>;
>>>> +      #size-cells = <0>;
>>>> +      gpio at 45 {
>>>
>>> ngl, seems strange to classify the device as a regulator in directory
>>> and name, but use gpio as the node name in the example.
>>>
>>> Otherwise, this seems fine - if you feel that the hardware is
>>> substantively differentially to what's in the "v1" regulator then
>>> keeping them apart is valid.
>>> Acked-by: Conor Dooley <conor.dooley at microchip.com>
>> I can rename it to "mcu@" or "mfd@" some such ?
I called it a regulator@ and sent a V2. I didn't include the AB, please 
give it a once-over and provide one if still applicable.

Thanks !