[PATCH net-next v2 00/11] net: stmmac: mdio cleanups

[Mohd Ayaan Anwar]

On Thu, Sep 04, 2025 at 01:10:42PM +0100, Russell King (Oracle) wrote:
> On Wed, Sep 03, 2025 at 01:38:57PM +0100, Russell King (Oracle) wrote:
> Hi,
> 
> Clean up the stmmac MDIO code:
> - provide an address register formatter to avoid repeated code
> - provide a common function to wait for the busy bit to clear
> - pre-compute the CR field (mdio clock divider)
> - move address formatter into read/write functions
> - combine the read/write functions into a common accessor function
> - move runtime PM handling into common accessor function
> - rename register constants to better reflect manufacturer names
> - move stmmac_clk_csr_set() into stmmac_mdio
> - make stmmac_clk_csr_set() return the CR field value and remove
>   priv->clk_csr
> - clean up if() range tests in stmmac_clk_csr_set()
> - use STMMAC_CSR_xxx definitions in initialisers
> 
> Untested on hardware; would be grateful for any testing people can do.
> 

Picked this series on top of net-next and was able to test on the
Qualcomm QCS9100 Ride R3 board with the AQR115C Phy. No issues seen with
C45 MDIO operations, so:

Tested-by: Mohd Ayaan Anwar <quic_mohdayaa at quicinc.com>

	Ayaan

> v2: add "Return:" to patch 1 and 9
> 
>  drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c  |   5 +-
>  .../net/ethernet/stmicro/stmmac/dwmac-loongson.c   |   3 +-
>  drivers/net/ethernet/stmicro/stmmac/stmmac.h       |   2 +-
>  drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  82 -----
>  drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c  | 345 ++++++++++++---------
>  drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c   |   5 +-
>  6 files changed, 207 insertions(+), 235 deletions(-)
> 
> -- 
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
>