[PATCH 1/2] arm64: dts: broadcom: rp1: Add USB nodes

[Andrea della Porta]

Hi Krzysztof,

On 13:05 Thu 04 Sep     , Krzysztof Kozlowski wrote:
> On 28/08/2025 15:50, Andrea della Porta wrote:
> > The RaspberryPi 5 has RP1 chipset containing two USB host controller,
> > while presenting two USB 2.0 and two USB 3.0 ports to the outside.
> > 
> > Add the relevant USB nodes to the devicetree.
> > 
> > Signed-off-by: Andrea della Porta <andrea.porta at suse.com>
> > ---
> >  arch/arm64/boot/dts/broadcom/rp1-common.dtsi | 28 ++++++++++++++++++++
> >  1 file changed, 28 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
> > index 5002a375eb0b..116617fcb1eb 100644
> > --- a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
> > +++ b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
> > @@ -39,4 +39,32 @@ rp1_gpio: pinctrl at 400d0000 {
> >  			     <1 IRQ_TYPE_LEVEL_HIGH>,
> >  			     <2 IRQ_TYPE_LEVEL_HIGH>;
> >  	};
> > +
> > +	rp1_usb0: usb at 40200000 {
> > +		reg = <0x00 0x40200000  0x0 0x100000>;
> > +		compatible = "snps,dwc3";
> Please order properties and nodes according to DTS coding style.

I'll do. 

Many thanks,
Andrea

> 
> Best regards,
> Krzysztof