[PATCH v2 2/2] arm64: dts: broadcom: Enable USB devicetree entries for Rpi5

[Andrea della Porta]

RaspberryPi 5 presents two USB 2.0 and two USB 3.0 ports.

Configure and enable the USB nodes in the devicetree.

Signed-off-by: Andrea della Porta <andrea.porta at suse.com>
---
 .../arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index 865f092608a6..95ab67c7aa47 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -21,3 +21,20 @@
 &pcie2 {
 	#include "rp1-nexus.dtsi"
 };
+
+&rp1_gpio {
+	usb_vbus_default_state: usb-vbus-default-state {
+		function = "vbus1";
+		groups = "vbus1";
+	};
+};
+
+&rp1_usb0 {
+	pinctrl-0 = <&usb_vbus_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rp1_usb1 {
+	status = "okay";
+};
-- 
2.35.3