[PATCH v5] PCI: imx6: Enable the vpcie3v3aux regulator when fetch it

[Manivannan Sadhasivam]

On Wed, Aug 20, 2025 at 10:23:28AM GMT, Richard Zhu wrote:
> Refer to PCIe CEM r6.0, sec 2.3 WAKE# Signal, WAKE# signal is only
> asserted by the Add-in Card when all its functions are in D3Cold state
> and at least one of its functions is enabled for wakeup generation. The
> 3.3V auxiliary power (+3.3Vaux) must be present and used for wakeup
> process.
> 
> When the 3.3V auxiliary power is present, fetch this auxiliary regulator
> at probe time and keep it enabled for the entire PCIe controller
> lifecycle. This ensures support for outbound wake-up mechanism such as
> WAKE# signaling.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> ---
> v5 changes:
> - Use the vpcie3v3aux property instead of adding a duplicated one.
> - Move the comments from the code changes into the description of
>   commit.
> 
> v4 changes:
> Move the dt-binding to snps,dw-pcie-common.yaml.
> 
> v3 changes:
> Add a new vaux power supply used to specify the regulator powered up the
> WAKE# circuit on the connector when WAKE# is supported.
> 
> v2 changes:
> Update the commit message, and add reviewed-by from Frank.
> https://patchwork.kernel.org/project/linux-pci/patch/20250619072438.125921-1-hongxing.zhu@nxp.com/
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 5a38cfaf989b1..5067da14bc053 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -1739,6 +1739,10 @@ static int imx_pcie_probe(struct platform_device *pdev)
>  	pci->max_link_speed = 1;
>  	of_property_read_u32(node, "fsl,max-link-speed", &pci->max_link_speed);
>  
> +	ret = devm_regulator_get_enable_optional(&pdev->dev, "vpcie3v3aux");
> +	if (ret < 0 && ret != -ENODEV)
> +		return dev_err_probe(dev, ret, "failed to enable pcie3v3vaux");
> +

So if Vaux is available, do we still need the IMX95_PCIE_SYS_AUX_PWR_DET setting
in imx95_pcie_init_phy()?

- Mani

-- 
மணிவண்ணன் சதாசிவம்