[PATCH v3 3/3] arm64: dts: ti: k3-pinctrl: Add the remaining macros

[Akashdeep Kaur]

Hi Udit,

On 04/09/25 18:06, Kumar, Udit wrote:
> 

...

>> ...
>>>>   #define PULLTYPESEL_SHIFT    (17)
>>>>   #define RXACTIVE_SHIFT        (18)
>>>> +#define DRV_STR_SHIFT           (19)
>>>
>>> referring to above TRM mentioned in commit message
>>>
>>> Bit 20-19 are for DRV_STR, and description says
>>>
>>> 0 - Default
>>> 1 - Reserved
>>> 2 - Reserved
>>> 3 - Reserved
>>>
>>> Not sure, is there some additional document to be referred for 
>>> PIN_DRIVE_STRENGTH
>>
>> This information will be updated in TRM in coming cycles.
> 
> 
> Sorry ,
> 
> can not ack before TRM update

The information can be found at 
https://www.ti.com/lit/ug/spruj83b/spruj83b.pdf in Table 14-8769. 
Description Of The Pad Configuration Register Bit

> 
> 
> 
>>>
>>>
>>>> +#define DS_ISO_OVERRIDE_SHIFT   (22)
>>>> +#define DS_ISO_BYPASS_EN_SHIFT  (23)
>>>

...

>>>
>>>>   /* Default mux configuration for gpio-ranges to use with pinctrl */
>>>>   #define PIN_GPIO_RANGE_IOPAD    (PIN_INPUT | 7)
>>
>> Regards,
>> Akashdeep Kaur

Thanks,
Akashdeep Kaur