[PATCH net-next 07/11] net: stmmac: mdio: improve mdio register field definitions

[Russell King (Oracle)]

Include the register name in the definitions, and use a name which
more closely resembles that used in documentation, while still being
descriptive.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 .../net/ethernet/stmicro/stmmac/stmmac_mdio.c    | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 2d6a5d40e2c1..4d0de3c269a8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -23,9 +23,9 @@
 #include "dwxgmac2.h"
 #include "stmmac.h"
 
-#define MII_BUSY 0x00000001
-#define MII_WRITE 0x00000002
-#define MII_DATA_MASK GENMASK(15, 0)
+#define MII_ADDR_GBUSY			BIT(0)
+#define MII_ADDR_GWRITE			BIT(1)
+#define MII_DATA_GD_MASK		GENMASK(15, 0)
 
 /* GMAC4 defines */
 #define MII_GMAC4_GOC_SHIFT		2
@@ -235,7 +235,7 @@ static u32 stmmac_mdio_format_addr(struct stmmac_priv *priv,
 	return ((pa << mii_regs->addr_shift) & mii_regs->addr_mask) |
 	       ((gr << mii_regs->reg_shift) & mii_regs->reg_mask) |
 	       priv->gmii_address_bus_config |
-	       MII_BUSY;
+	       MII_ADDR_GBUSY;
 }
 
 static int stmmac_mdio_access(struct stmmac_priv *priv, unsigned int pa,
@@ -250,7 +250,7 @@ static int stmmac_mdio_access(struct stmmac_priv *priv, unsigned int pa,
 	if (ret < 0)
 		return ret;
 
-	ret = stmmac_mdio_wait(mii_address, MII_BUSY);
+	ret = stmmac_mdio_wait(mii_address, MII_ADDR_GBUSY);
 	if (ret)
 		goto out;
 
@@ -259,12 +259,12 @@ static int stmmac_mdio_access(struct stmmac_priv *priv, unsigned int pa,
 	writel(data, mii_data);
 	writel(addr, mii_address);
 
-	ret = stmmac_mdio_wait(mii_address, MII_BUSY);
+	ret = stmmac_mdio_wait(mii_address, MII_ADDR_GBUSY);
 	if (ret)
 		goto out;
 
 	/* Read the data from the MII data register if in read mode */
-	ret = read ? readl(mii_data) & MII_DATA_MASK : 0;
+	ret = read ? readl(mii_data) & MII_DATA_GD_MASK : 0;
 
 out:
 	pm_runtime_put(priv->device);
@@ -345,7 +345,7 @@ static int stmmac_mdio_write_c22(struct mii_bus *bus, int phyaddr, int phyreg,
 	if (priv->plat->has_gmac4)
 		cmd = MII_GMAC4_WRITE;
 	else
-		cmd = MII_WRITE;
+		cmd = MII_ADDR_GWRITE;
 
 	return stmmac_mdio_write(priv, phyaddr, phyreg, cmd, phydata);
 }
-- 
2.47.2