[PATCH 1/2] dt-bindings: iio: afe: current-sense-amplifier: Add io-channel-cells

[Primoz Fiser]

The current-sense-amplifier is an IIO provider thus can be referenced by
IIO consumers (via "io-channels" property in consumer device node). Such
provider is required to describe number of cells used in phandle lookup
with "io-channel-cells" property, otherwise the following kernel error
is present:

  OF: /iio-hwmon: could not get #io-channel-cells for /current-sense

Also fixes the following dtbs_check warning:

  current-sense: '#io-channel-cells' does not match any of the regexes:
  'pinctrl-[0-9]+' from schema $id:
  http://devicetree.org/schemas/iio/afe/current-sense-amplifier.yaml#

Fixes: fbac26b9ad21 ("dt-bindings:iio:afe:current-sense-amplifier: txt to yaml conversion.")
Signed-off-by: Primoz Fiser <primoz.fiser at norik.com>
---
 .../devicetree/bindings/iio/afe/current-sense-amplifier.yaml  | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml b/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml
index 527501c1d695..bcf4ddcfd13b 100644
--- a/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml
+++ b/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml
@@ -24,6 +24,9 @@ properties:
     description: |
       Channel node of a voltage io-channel.
 
+  "#io-channel-cells":
+    const: 0
+
   sense-resistor-micro-ohms:
     description: The sense resistance.
 
@@ -46,6 +49,7 @@ examples:
   - |
     sysi {
         compatible = "current-sense-amplifier";
+        #io-channel-cells = <0>;
         io-channels = <&tiadc 0>;
 
         sense-resistor-micro-ohms = <20000>;
-- 
2.34.1