[PATCH 0/4] arm64: dts: st: add ethernet1 controller support on stm32mp23/25 boards

[Gatien Chevallier]

All of the current stm32mp2x boards embed an ethernet1 SNPS GMAC5.x
controller.

Add the support for it on stm32mp235f-dk, stm32mp257f-dk and
stm32mp257f-ev1 boards and default enable it.

On the stm32mp257f-ev1 board, we choose to keep the ethernet1
controller as a standalone ethernet controller instead of using
the TSN capable switch.

Signed-off-by: Gatien Chevallier <gatien.chevallier at foss.st.com>
---
Gatien Chevallier (4):
      arm64: dts: st: add eth1 pins for stm32mp2x platforms
      arm64: dts: st: enable ethernet1 controller on stm32mp257f-dk
      arm64: dts: st: enable ethernet1 controller on stm32mp257f-ev1
      arm64: dts: st: enable ethernet1 controller on stm32mp235f-dk

 arch/arm64/boot/dts/st/stm32mp235f-dk.dts     |  24 +++++
 arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 126 ++++++++++++++++++++++++++
 arch/arm64/boot/dts/st/stm32mp257f-dk.dts     |  24 +++++
 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts    |  25 +++++
 4 files changed, 199 insertions(+)
---
base-commit: 4952fb7f53d4c9f007147ffb250c04ed40c959f7
change-id: 20250902-mp2_ethernet-97ddde08f903

Best regards,
-- 
Gatien Chevallier <gatien.chevallier at foss.st.com>