[PATCH v4 0/5] media: imx8qxp: add parallel camera support

[Frank Li]

On Tue, Aug 05, 2025 at 04:08:22AM +0300, Laurent Pinchart wrote:
> Hi Frank,
>
> Thank you for the patches.
>
> I've quite busy these days, and I don't believe I will have time to
> review this series before coming back from OSS Europe at the beginning
> of September. Let's see if anyone on CC could volunteer.

Laurent Pincha
	I hope you have good time at OSS.

	Do you have chance to review this patch?

Frank

>
> On Tue, Jul 29, 2025 at 12:06:21PM -0400, Frank Li wrote:
> > Add parallel camera support for i.MX8 chips.
> >
> > The below patch to add new format support to test ov5640 sensor
> >    media: nxp: isi: add support for UYVY8_2X8 and YUYV8_2X8 bus codes
> >
> > The bindings and driver for parallel CSI
> >    dt-bindings: media: add i.MX parallel csi support
> >    media: nxp: add V4L2 subdev driver for parallel CSI
> >
> > DTS part need depend on previous MIPI CSI patches.
> >   https://lore.kernel.org/imx/20250522-8qxp_camera-v5-13-d4be869fdb7e@nxp.com/
> >
> >   arm64: dts: imx8: add parellel csi nodes
> >   arm64: dts: imx8qxp-mek: add parallel ov5640 camera support
> >
> > Signed-off-by: Frank Li <Frank.Li at nxp.com>
> > ---
> > Changes in v4:
> > - remove imx93 driver support since have not camera sensor module to do test now.
> >   Add it later
> > - Add new patch
> >   media: v4l2-common: Add helper function v4l_get_required_align_by_bpp()
> > - See each patche's change log for detail.
> > - Link to v3: https://lore.kernel.org/r/20250708-imx8qxp_pcam-v3-0-c8533e405df1@nxp.com
> >
> > Changes in v3:
> > - replace CSI with CPI.
> > - detail change see each patch's change logs
> > - Link to v2: https://lore.kernel.org/r/20250703-imx8qxp_pcam-v2-0-188be85f06f1@nxp.com
> >
> > Changes in v2:
> > - remove patch media: nxp: isi: add support for UYVY8_2X8 and YUYV8_2X8 bus codes
> >   because pcif controller convert 2x8 to 1x16 to match isi's input
> > - rename comaptible string to fsl,imx8qxp-pcif
> > - See each patches's change log for detail
> > - Link to v1: https://lore.kernel.org/r/20250630-imx8qxp_pcam-v1-0-eccd38d99201@nxp.com
> >
> > ---
> > Alice Yuan (2):
> >       dt-bindings: media: add i.MX parallel CPI support
> >       media: nxp: add V4L2 subdev driver for camera parallel interface (CPI)
> >
> > Frank Li (3):
> >       media: v4l2-common: Add helper function v4l_get_required_align_by_bpp()
> >       arm64: dts: imx8: add camera parallel interface (CPI) node
> >       arm64: dts: imx8qxp-mek: add parallel ov5640 camera support
> >
> >  .../devicetree/bindings/media/fsl,imx93-pcif.yaml  | 126 ++++
> >  MAINTAINERS                                        |   2 +
> >  arch/arm64/boot/dts/freescale/Makefile             |   3 +
> >  arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi     |  13 +
> >  .../boot/dts/freescale/imx8qxp-mek-ov5640-cpi.dtso |  83 +++
> >  arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi  |  27 +
> >  drivers/media/platform/nxp/Kconfig                 |  11 +
> >  drivers/media/platform/nxp/Makefile                |   1 +
> >  drivers/media/platform/nxp/imx-parallel-cpi.c      | 728 +++++++++++++++++++++
> >  include/media/v4l2-common.h                        |  30 +
> >  10 files changed, 1024 insertions(+)
> > ---
> > base-commit: 37a294c6211bea9deb14bedd2dcce498935cbd4e
> > change-id: 20250626-imx8qxp_pcam-d851238343c3
>
> --
> Regards,
>
> Laurent Pinchart