[PATCH 4/4] arm64: zynqmp: Enable DP in kr260/kv260 revA

[Michal Simek]

Enable DP output in both CC (Carrier Cards).

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 .../boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso   | 17 +++++++++++++++++
 .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso   | 17 +++++++++++++++++
 2 files changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
index fbacfa984d76..b92dcb86e87e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
@@ -71,6 +71,17 @@ clk_25_1: si5332-4 { /* u17 - GEM3 */
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
@@ -145,6 +156,12 @@ &zynqmp_dpsub {
 	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
 };
 
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
+
 &zynqmp_dpdma {
 	status = "okay";
 	assigned-clock-rates = <600000000>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index 3c36eb52e968..d7351a17d3e8 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -72,6 +72,17 @@ si5332_5: si5332-5 { /* u17 */
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
@@ -122,6 +133,12 @@ &zynqmp_dpsub {
 	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
 };
 
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
+
 &zynqmp_dpdma {
 	status = "okay";
 	assigned-clock-rates = <600000000>;
-- 
2.43.0