[PATCH v5 1/4] media: dt-bindings: nxp,imx8mq-mipi-csi2: Add i.MX8ULP compatible string

[Laurent Pinchart]

Hi Guoniu,

Thank you for the patch.

On Mon, Sep 01, 2025 at 02:25:29PM +0800, Guoniu Zhou wrote:
> The CSI-2 receiver in the i.MX8ULP is almost identical to the version
> present in the i.MX8QXP/QM, but i.MX8ULP CSI-2 controller needs pclk
> clock as the input clock for its APB interface of Control and Status
> register(CSR). So add compatible string fsl,imx8ulp-mipi-csi2 and
> increase maxItems of Clocks (clock-names) to 4 from 3.  And keep the
> same restriction for existed compatible.

s/existed/existing/

> Signed-off-by: Guoniu Zhou <guoniu.zhou at nxp.com>
> ---
>  .../bindings/media/nxp,imx8mq-mipi-csi2.yaml       | 46 ++++++++++++++++++++--
>  1 file changed, 43 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> index 3389bab266a9adbda313c8ad795b998641df12f3..412cedddb0efee1a49d1b90b02baa7a625c797ec 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
> @@ -21,7 +21,9 @@ properties:
>            - fsl,imx8mq-mipi-csi2
>            - fsl,imx8qxp-mipi-csi2
>        - items:
> -          - const: fsl,imx8qm-mipi-csi2
> +          - enum:
> +              - fsl,imx8qm-mipi-csi2
> +              - fsl,imx8ulp-mipi-csi2
>            - const: fsl,imx8qxp-mipi-csi2

According to this, the ULP version is compatible with the QXP version.

>  
>    reg:
> @@ -39,12 +41,16 @@ properties:
>                       clock that the RX DPHY receives.
>        - description: ui is the pixel clock (phy_ref up to 333Mhz).
>                       See the reference manual for details.
> +      - description: pclk is clock for csr APB interface.
> +    minItems: 3
>  
>    clock-names:
>      items:
>        - const: core
>        - const: esc
>        - const: ui
> +      - const: pclk
> +    minItems: 3
>  
>    power-domains:
>      maxItems: 1
> @@ -130,19 +136,53 @@ allOf:
>          compatible:
>            contains:
>              enum:
> -              - fsl,imx8qxp-mipi-csi2
> +              - fsl,imx8ulp-mipi-csi2
> +    then:
> +      properties:
> +        reg:
> +          minItems: 2
> +        resets:
> +          minItems: 2
> +          maxItems: 2
> +        clocks:
> +          minItems: 4
> +        clock-names:
> +          minItems: 4

But according to this, the ULP version requires more clocks than the QXP
version.

> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx8qm-mipi-csi2

QM is compatible with the QXP, so you don't need to list it here.

          contains:
            const: fsl,imx8qxp-mipi-csi2

is enough to cover both.

> +            const: fsl,imx8qxp-mipi-csi2
>      then:
>        properties:
>          reg:
>            minItems: 2
>          resets:
>            maxItems: 1
> -    else:
> +        clocks:
> +          maxItems: 3
> +        clock-names:
> +          maxItems: 3
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx8mq-mipi-csi2
> +    then:
>        properties:
>          reg:
>            maxItems: 1
>          resets:
>            minItems: 3
> +        clocks:
> +          maxItems: 3
> +        clock-names:
> +          maxItems: 3
>        required:
>          - fsl,mipi-phy-gpr
>  

-- 
Regards,

Laurent Pinchart