[PATCH 11/13] platform/raspberrypi: vchiq-mmal: Reset buffers_with_vpu on port_enable

[Jai Luthra]

From: Dave Stevenson <dave.stevenson at raspberrypi.com>

Should we go through the timeout failure case with port_disable
not returning all buffers for whatever reason, the
buffers_with_vpu counter gets left at a non-zero value, which
will cause reference counting issues should the instance be
reused.

Reset the count when the port is enabled again, but before
any buffers have been sent to the VPU.

Signed-off-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
Signed-off-by: Jai Luthra <jai.luthra at ideasonboard.com>
---
 drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c b/drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c
index 02fbf061c171cba287657266aa1731333609b3b0..f9e1a773fa55f885f240f4945b980f77676d83a6 100644
--- a/drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c
+++ b/drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c
@@ -1490,6 +1490,8 @@ static int port_enable(struct vchiq_mmal_instance *instance,
 
 	port->enabled = true;
 
+	atomic_set(&port->buffers_with_vpu, 0);
+
 	if (port->buffer_cb) {
 		/* send buffer headers to videocore */
 		hdr_count = 1;

-- 
2.51.0