[PATCH] arm64: dts: rockchip: Pinebook Pro: Update WiFi
Peter Robinson
pbrobinson at gmail.com
Tue Jul 29 13:09:41 PDT 2025
Hi Dragan,
> On 2025-07-29 20:58, Peter Robinson wrote:
> > Update the WiFi configuration to include the wake-up
> > pin and add an ethernet alias to allow assignment of
> > a mac-address from the firmware.
> >
> > Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
> > ---
> > .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 19 +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
> > b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
> > index 5a8551d9ffe47..05c48cb09df6f 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
> > @@ -19,6 +19,7 @@ / {
> > chassis-type = "laptop";
> >
> > aliases {
> > + ethernet0 = &brcmf;
>
> I'm sorry, but this alias isn't acceptable. In a few words, this
> simply isn't an Ethernet interface.
Can you explain why? It's a wireless ethernet interface with a MAC
address, there's other example in the kernel doing this so there's
already a precedent, can you explain how else to do this or give me an
example?
> We're already stretching a bit the dynamic nature of, well, everything
> with the aliases in the Rockchip DT files, and an alias like this one
> would be stretching the whole thing beyond the breaking point.
Why? If you look through DT outside of rockchip there's even more
stretching and I don't see how using this goes beyond breaking, I
think this is a bit of an exaggeration. Rather than saying no how
about explaining an alternative solution?
> > mmc0 = &sdio0;
> > mmc1 = &sdmmc;
> > mmc2 = &sdhci;
> > @@ -883,6 +884,12 @@ vcc5v0_host_en_pin: vcc5v0-host-en-pin {
> > };
> > };
> >
> > + wifi {
> > + wifi_host_wake_l: wifi-host-wake-l {
> > + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > + };
> > +
> > wireless-bluetooth {
> > bt_wake_pin: bt-wake-pin {
> > rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
> > @@ -940,7 +947,19 @@ &sdio0 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
> > sd-uhs-sdr104;
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > status = "okay";
> > +
> > + brcmf: wifi at 1 {
> > + reg = <1>;
> > + compatible = "brcm,bcm4329-fmac";
> > + interrupt-parent = <&gpio0>;
> > + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "host-wake";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&wifi_host_wake_l>;
> > + };
> > };
> >
> > &sdhci {
More information about the linux-arm-kernel
mailing list