[PATCH v1 0/7] drm/rockchip: Add MIPI DSI support for RK3368

[WeiHao Li]

This series adds MIPI DSI support for the Rockchip RK3368 SoC, enabling
native display connectivity through the MIPI DSI host controller and
PHY. The changes span multiple subsystems, including clock control,
DRM/VOP integration, DSI controller binding, and PHY driver updates.

Key changes:
  - Update the Rockchip MIPI DSI PHY driver to preperly handle RK3368
    phy initialization.
  - Add missing lut_size of vop_data for RK3368.
  - Add missing clock ID SCLK_MIPIDSI_24M to the RK3368 CRU driver,
    which is required for enabling the 24MHz reference clock.
  - Add MIPI DSI node to rk3368.dtsi with correct clocks, resets,
    and register mappings.

These changes were tested on a RK3368-based board with a MIPI DSI
panel [1]. The display boots successfully with console output.

[1] https://ieiao.github.io/wiki/embedded-dev/rockchip/rk3368

Tested-by: WeiHao Li <cn.liweihao at gmail.com>
Signed-off-by: WeiHao Li <cn.liweihao at gmail.com>

WeiHao Li (7):
  drm/rockchip: dsi: Add support for RK3368
  drm/rockchip: vop: add lut_size for RK3368 vop_data
  dt-bindings: clock: rk3368: Add SCLK_MIPIDSI_24M
  clk: rockchip: use clock ids for SCLK_MIPIDSI_24M on rk3368
  ARM: dts: rockchip: Add display subsystem for RK3368
  ARM: dts: rockchip: Add D-PHY for RK3368
  ARM: dts: rockchip: Add DSI for RK3368

 arch/arm64/boot/dts/rockchip/rk3368.dtsi      | 79 +++++++++++++++++++
 drivers/clk/rockchip/clk-rk3368.c             |  2 +-
 .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c   | 20 +++++
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c   |  1 +
 include/dt-bindings/clock/rk3368-cru.h        |  1 +
 5 files changed, 102 insertions(+), 1 deletion(-)

-- 
2.47.2