[PATCH v3 3/6] firmware: arm_scmi: imx: Support getting cfg info of MISC protocol

[Sudeep Holla]

On Wed, Aug 27, 2025 at 12:59:15PM +0800, Peng Fan wrote:
> MISC protocol supports getting the System Manager(SM) mode selection
> and configuration name. Retrieve the information from SM.
> 
> Reviewed-by: Cristian Marussi <cristian.marussi at arm.com>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  .../firmware/arm_scmi/vendors/imx/imx-sm-misc.c    | 35 ++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/drivers/firmware/arm_scmi/vendors/imx/imx-sm-misc.c b/drivers/firmware/arm_scmi/vendors/imx/imx-sm-misc.c
> index 464afeae8267d8c1eca4c4d5e008eca6d741c6ff..220b9369fb537306f9e1a105930ad4d65e6b10aa 100644
> --- a/drivers/firmware/arm_scmi/vendors/imx/imx-sm-misc.c
> +++ b/drivers/firmware/arm_scmi/vendors/imx/imx-sm-misc.c
> @@ -26,6 +26,7 @@ enum scmi_imx_misc_protocol_cmd {
>  	SCMI_IMX_MISC_CTRL_SET	= 0x3,
>  	SCMI_IMX_MISC_CTRL_GET	= 0x4,
>  	SCMI_IMX_MISC_DISCOVER_BUILDINFO = 0x6,
> +	SCMI_IMX_MISC_CFG_INFO = 0xC,

1. Order it by command number
2. Be consistent with the document, MISC_CFG_INFO_GET is used there.

>  	SCMI_IMX_MISC_CTRL_NOTIFY = 0x8,
>  };
>  
> @@ -75,6 +76,12 @@ struct scmi_imx_misc_buildinfo_out {
>  	u8 buildtime[MISC_MAX_BUILDTIME];
>  };
>  
> +struct scmi_imx_misc_cfg_info_out {
> +	__le32 msel;
> +#define MISC_MAX_CFGNAME	16
> +	u8 cfgname[MISC_MAX_CFGNAME];
> +};
> +
>  static int scmi_imx_misc_attributes_get(const struct scmi_protocol_handle *ph,
>  					struct scmi_imx_misc_info *mi)
>  {
> @@ -309,6 +316,30 @@ static int scmi_imx_misc_discover_build_info(const struct scmi_protocol_handle *
>  	return ret;
>  }
>  
> +static int scmi_imx_misc_cfg_info(const struct scmi_protocol_handle *ph)
> +{
> +	struct scmi_imx_misc_cfg_info_out *out;
> +	char name[MISC_MAX_CFGNAME];
> +	struct scmi_xfer *t;
> +	int ret;
> +
> +	ret = ph->xops->xfer_get_init(ph, SCMI_IMX_MISC_CFG_INFO, 0, sizeof(*out), &t);
> +	if (ret)
> +		return ret;
> +
> +	ret = ph->xops->do_xfer(ph, t);
> +	if (!ret) {
> +		out = t->rx.buf;
> +		strscpy(name, out->cfgname, MISC_MAX_CFGNAME);
> +		dev_info(ph->dev, "SM Config\t= %s, mSel = %u\n",
> +			 name, le32_to_cpu(out->msel));
> +	}
> +
> +	ph->xops->xfer_put(ph, t);
> +
> +	return ret;
> +}
> +
>  static const struct scmi_imx_misc_proto_ops scmi_imx_misc_proto_ops = {
>  	.misc_ctrl_set = scmi_imx_misc_ctrl_set,
>  	.misc_ctrl_get = scmi_imx_misc_ctrl_get,
> @@ -340,6 +371,10 @@ static int scmi_imx_misc_protocol_init(const struct scmi_protocol_handle *ph)
>  	if (ret)
>  		return ret;
>  
> +	ret = scmi_imx_misc_cfg_info(ph);

s/scmi_imx_misc_cfg_info/scmi_imx_misc_cfg_info_get/

> +	if (ret)

Again the document hasn't mark it as mandatory, so handle NOT_SUPPORTED
gracefully.

-- 
Regards,
Sudeep