[PATCH v2 2/3] coresight: tpda: add logic to configure TPDA_SYNCR register

[James Clark]

On 27/08/2025 5:20 am, Jie Gan wrote:
> From: Tao Zhang <tao.zhang at oss.qualcomm.com>
> 
> The TPDA_SYNCR register defines the frequency at which TPDA generates
> ASYNC packets, enabling userspace tools to accurately parse each valid
> packet.
> 
> Signed-off-by: Tao Zhang <tao.zhang at oss.qualcomm.com>
> Co-developed-by: Jie Gan <jie.gan at oss.qualcomm.com>
> Signed-off-by: Jie Gan <jie.gan at oss.qualcomm.com>
> ---
>   drivers/hwtracing/coresight/coresight-tpda.c | 7 +++++++
>   drivers/hwtracing/coresight/coresight-tpda.h | 6 ++++++
>   2 files changed, 13 insertions(+)
> 
> diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c
> index 647ab49a98d7..430f76c559f2 100644
> --- a/drivers/hwtracing/coresight/coresight-tpda.c
> +++ b/drivers/hwtracing/coresight/coresight-tpda.c
> @@ -187,6 +187,13 @@ static void tpda_enable_pre_port(struct tpda_drvdata *drvdata)
>   	 */
>   	if (drvdata->trig_flag_ts)
>   		writel_relaxed(0x0, drvdata->base + TPDA_FPID_CR);
> +
> +	/* Program the counter value for TPDA_SYNCR */
> +	val = readl_relaxed(drvdata->base + TPDA_SYNCR);
> +	/* Clear the mode */
> +	val &= ~TPDA_SYNCR_MODE_CTRL;
> +	val |= FIELD_PREP(TPDA_SYNCR_COUNTER_MASK, TPDA_SYNCR_MAX_COUNTER_VAL);

Just use the mask directly if you want to set all the bits. This makes 
it seem like the MAX_COUNTER_VAL is something different.

val |= TPDA_SYNCR_COUNTER_MASK

> +	writel_relaxed(val, drvdata->base + TPDA_SYNCR);
>   }
>   
>   static int tpda_enable_port(struct tpda_drvdata *drvdata, int port)
> diff --git a/drivers/hwtracing/coresight/coresight-tpda.h b/drivers/hwtracing/coresight/coresight-tpda.h
> index 0be625fb52fd..8e1b66115ad1 100644
> --- a/drivers/hwtracing/coresight/coresight-tpda.h
> +++ b/drivers/hwtracing/coresight/coresight-tpda.h
> @@ -9,6 +9,7 @@
>   #define TPDA_CR			(0x000)
>   #define TPDA_Pn_CR(n)		(0x004 + (n * 4))
>   #define TPDA_FPID_CR		(0x084)
> +#define TPDA_SYNCR		(0x08C)
>   
>   /* Cross trigger FREQ packets timestamp bit */
>   #define TPDA_CR_FREQTS		BIT(2)
> @@ -27,6 +28,11 @@
>   #define TPDA_Pn_CR_CMBSIZE		GENMASK(7, 6)
>   /* Aggregator port DSB data set element size bit */
>   #define TPDA_Pn_CR_DSBSIZE		BIT(8)
> +/* TPDA_SYNCR mode control bit */
> +#define TPDA_SYNCR_MODE_CTRL		BIT(12)
> +/* TPDA_SYNCR counter mask */
> +#define TPDA_SYNCR_COUNTER_MASK		GENMASK(11, 0)
> +#define TPDA_SYNCR_MAX_COUNTER_VAL	(0xFFF)

No need to define a numeric value that's the same as the mask. It also 
opens the possibility of making a mistake.

>   
>   #define TPDA_MAX_INPORTS	32
>