[PATCH v2 3/3] coresight: tpda: add sysfs node to flush specific port

[James Clark]

On 27/08/2025 5:20 am, Jie Gan wrote:
> From: Tao Zhang <tao.zhang at oss.qualcomm.com>
> 
> Setting bit i in the TPDA_FLUSH_CR register initiates a flush request
> for port i, forcing the data to synchronize and be transmitted to the
> sink device.
> 
> Signed-off-by: Tao Zhang <tao.zhang at oss.qualcomm.com>
> Co-developed-by: Jie Gan <jie.gan at oss.qualcomm.com>
> Signed-off-by: Jie Gan <jie.gan at oss.qualcomm.com>
> ---
>   .../testing/sysfs-bus-coresight-devices-tpda  |  7 ++++
>   drivers/hwtracing/coresight/coresight-tpda.c  | 42 +++++++++++++++++++
>   drivers/hwtracing/coresight/coresight-tpda.h  |  2 +
>   3 files changed, 51 insertions(+)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda
> index fb651aebeb31..2cf2dcfc13c8 100644
> --- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda
> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpda
> @@ -41,3 +41,10 @@ Contact:	Jinlong Mao <jinlong.mao at oss.qualcomm.com>, Tao Zhang <tao.zhang at oss.qu
>   Description:
>   		(RW) Configure the CMB/MCMB channel mode for all enabled ports.
>   		Value 0 means raw channel mapping mode. Value 1 means channel pair marking mode.
> +
> +What:		/sys/bus/coresight/devices/<tpda-name>/port_flush_req
> +Date:		August 2025
> +KernelVersion:	6.17
> +Contact:	Jinlong Mao <jinlong.mao at oss.qualcomm.com>, Tao Zhang <tao.zhang at oss.qualcomm.com>, Jie Gan <jie.gan at oss.qualcomm.com>
> +Description:
> +		(RW) Configure the bit i to requests a flush operation of port i on the TPDA.
> diff --git a/drivers/hwtracing/coresight/coresight-tpda.c b/drivers/hwtracing/coresight/coresight-tpda.c
> index 430f76c559f2..8b1fe128881d 100644
> --- a/drivers/hwtracing/coresight/coresight-tpda.c
> +++ b/drivers/hwtracing/coresight/coresight-tpda.c
> @@ -487,6 +487,47 @@ static ssize_t cmbchan_mode_store(struct device *dev,
>   }
>   static DEVICE_ATTR_RW(cmbchan_mode);
>   
> +static ssize_t port_flush_req_show(struct device *dev,
> +				   struct device_attribute *attr,
> +				   char *buf)
> +{
> +	struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent);
> +	unsigned long val;
> +
> +	if (!drvdata->csdev->refcnt)
> +		return -EINVAL;
> +
> +	guard(spinlock)(&drvdata->spinlock);
> +	CS_UNLOCK(drvdata->base);
> +	val = readl_relaxed(drvdata->base + TPDA_FLUSH_CR);
> +	CS_LOCK(drvdata->base);
> +	return sysfs_emit(buf, "%lx\n", val);

Still missing the 0x prefix

> +}
> +
> +static ssize_t port_flush_req_store(struct device *dev,
> +				    struct device_attribute *attr,
> +				    const char *buf,
> +				    size_t size)
> +{
> +	struct tpda_drvdata *drvdata = dev_get_drvdata(dev->parent);
> +	unsigned long val;
> +
> +	if (kstrtoul(buf, 0, &val))
> +		return -EINVAL;
> +
> +	if (!drvdata->csdev->refcnt || !val)
> +		return -EINVAL;
> +
> +	val |= FIELD_PREP(TPDA_MAX_INPORTS_MASK, val);

Using FIELD_PREP() now that it's the full width of the register makes 
less sense. Especially when there is no corresponding FIELD_FIT() check, 
  which is fine because everything always fits. But if you didn't know 
the mask was the full width you'd wonder if the check is missing.

I would just write val directly to TPDA_FLUSH_CR so it's simpler.

It should also have been val = FIELD_PREP(...)

> +	guard(spinlock)(&drvdata->spinlock);
> +	CS_UNLOCK(drvdata->base);
> +	writel_relaxed(val, drvdata->base + TPDA_FLUSH_CR);
> +	CS_LOCK(drvdata->base);
> +
> +	return size;
> +}
> +static DEVICE_ATTR_RW(port_flush_req);
> +
>   static struct attribute *tpda_attrs[] = {
>   	&dev_attr_trig_async_enable.attr,
>   	&dev_attr_trig_flag_ts_enable.attr,
> @@ -494,6 +535,7 @@ static struct attribute *tpda_attrs[] = {
>   	&dev_attr_freq_ts_enable.attr,
>   	&dev_attr_global_flush_req.attr,
>   	&dev_attr_cmbchan_mode.attr,
> +	&dev_attr_port_flush_req.attr,
>   	NULL,
>   };
>   
> diff --git a/drivers/hwtracing/coresight/coresight-tpda.h b/drivers/hwtracing/coresight/coresight-tpda.h
> index 8e1b66115ad1..56d3ad293e46 100644
> --- a/drivers/hwtracing/coresight/coresight-tpda.h
> +++ b/drivers/hwtracing/coresight/coresight-tpda.h
> @@ -10,6 +10,7 @@
>   #define TPDA_Pn_CR(n)		(0x004 + (n * 4))
>   #define TPDA_FPID_CR		(0x084)
>   #define TPDA_SYNCR		(0x08C)
> +#define TPDA_FLUSH_CR		(0x090)
>   
>   /* Cross trigger FREQ packets timestamp bit */
>   #define TPDA_CR_FREQTS		BIT(2)
> @@ -35,6 +36,7 @@
>   #define TPDA_SYNCR_MAX_COUNTER_VAL	(0xFFF)
>   
>   #define TPDA_MAX_INPORTS	32
> +#define TPDA_MAX_INPORTS_MASK	GENMASK(31, 0)
>   
>   /* Bits 6 ~ 12 is for atid value */
>   #define TPDA_CR_ATID		GENMASK(12, 6)