[PATCH v2 2/3] arm64: dts: mediatek: mt8189: Add pinmux macro header file

[Cathy Xu (许华婷)]

On Fri, 2025-07-18 at 08:44 +0200, AngeloGioacchino Del Regno wrote:
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> 
> 
> Il 11/07/25 11:44, Cathy Xu ha scritto:
> > Add the pinctrl header file on MediaTek mt8189.
> > 
> > Signed-off-by: Cathy Xu <ot_cathy.xu at mediatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/mt8189-pinfunc.h | 1125
> > +++++++++++++++++
> >   1 file changed, 1125 insertions(+)
> >   create mode 100644 arch/arm64/boot/dts/mediatek/mt8189-pinfunc.h
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8189-pinfunc.h
> > b/arch/arm64/boot/dts/mediatek/mt8189-pinfunc.h
> > new file mode 100644
> > index 000000000000..f9c270ebab89
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8189-pinfunc.h
> > @@ -0,0 +1,1125 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright (C) 2025 MediaTek Inc.
> > + * Author: Lei Xue <lei.xue at mediatek.com>
> > + *         Cathy Xu <ot_cathy.xu at mediatek.com>
> > + */
> > +
> > +#ifndef __MT8189_PINFUNC_H
> > +#define __MT8189_PINFUNC_H
> > +
> > +#include "mt65xx.h"
> > +
> 
> ..snip..
> 
> > +#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
> > +#define PINMUX_GPIO27__FUNC_DP_TX_HPD (MTK_PIN_NO(27) | 1)
> 
> 
> > +#define PINMUX_GPIO27__FUNC_mbistreaden_trigger (MTK_PIN_NO(27) |
> > 2)
> 
>                                 ^^^^^^^^^^^^^^^^^^^
> Please fix: this has to be uppercase as much as the other
> definitions.

  Thank you for your review. It will be fixed in next version.

> 
> 
> > +#define PINMUX_GPIO27__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(27) | 3)
> > +#define PINMUX_GPIO27__FUNC_TP_UCTS1_VCORE (MTK_PIN_NO(27) | 4)
> > +#define PINMUX_GPIO27__FUNC_CMVREF4 (MTK_PIN_NO(27) | 5)
> > +#define PINMUX_GPIO27__FUNC_EXTIF0_ACT (MTK_PIN_NO(27) | 6)
> > +#define PINMUX_GPIO27__FUNC_ANT_SEL0 (MTK_PIN_NO(27) | 7)
> > +
> > +#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
> > +#define PINMUX_GPIO28__FUNC_EDP_TX_HPD (MTK_PIN_NO(28) | 1)
> > +#define PINMUX_GPIO28__FUNC_mbistwriteen_trigger (MTK_PIN_NO(28) |
> > 2)
> 
> same here

  It will be fixed in next version.

> 
> > +#define PINMUX_GPIO28__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(28) | 3)
> > +#define PINMUX_GPIO28__FUNC_TP_URTS1_VCORE (MTK_PIN_NO(28) | 4)
> > +#define PINMUX_GPIO28__FUNC_EXTIF0_PRI (MTK_PIN_NO(28) | 6)
> > +#define PINMUX_GPIO28__FUNC_ANT_SEL1 (MTK_PIN_NO(28) | 7)
> > +
> 
> Cheers,
> Angelo