[PATCH mmc/next 3/3] arm64: dts: samsung,coreprimevelte: add SDIO

[Karel Balej]

Karel Balej, 2025-08-24T12:53:45+02:00:
> +	sdh2_pins_0: sdh2-pins-0 {
> +		pinctrl-single,pins = <
> +			0x24 1
> +			0x28 1
> +			0x2c 1
> +			0x30 1
> +			0x34 1
> +			0x38 1
> +			0x3c 1
> +			0x40 1
> +		>;
> +		pinctrl-single,drive-strength = <0x1000 0x1800>;
> +		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
> +		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
> +		pinctrl-single,input-schmitt = <0 0x30>;
> +		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
> +		pinctrl-single,low-power-mode = <0 0x388>;
> +	};
> +
> +	sdh2_pins_1: sdh2-pins-1 {
> +		pinctrl-single,pins = <0x64 1>;
> +		pinctrl-single,drive-strength = <0x1000 0x1800>;
> +		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
> +		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
> +		pinctrl-single,input-schmitt = <0 0x30>;
> +		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
> +		pinctrl-single,low-power-mode = <0x208 0x388>;
> +	};
> +
> +	sdh2_pins_2: sdh2-pins-2 {
> +		pinctrl-single,pins = <0x5c 1>;
> +		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
> +		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
> +		pinctrl-single,low-power-mode = <0x288 0x388>;
> +	};
> +
> +	sdh2_fast_pins_0: sdh2-fast-pins-0 {
> +		pinctrl-single,pins = <
> +			0x24 1
> +			0x28 1
> +			0x2c 1
> +			0x30 1
> +			0x34 1
> +			0x38 1
> +			0x3c 1
> +			0x40 1
> +		>;
> +		pinctrl-single,drive-strength = <0x1800 0x1800>;
> +		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
> +		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
> +		pinctrl-single,input-schmitt = <0 0x30>;
> +		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
> +		pinctrl-single,low-power-mode = <0 0x388>;
> +	};
> +
> +	sdh2_fast_pins_1: sdh2-fast-pins-1 {
> +		pinctrl-single,pins = <0x64 1>;
> +		pinctrl-single,drive-strength = <0x1800 0x1800>;
> +		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
> +		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
> +		pinctrl-single,input-schmitt = <0 0x30>;
> +		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
> +		pinctrl-single,low-power-mode = <0x208 0x388>;
> +	};
> +
> +	sdh2_fast_pins_2: sdh2-fast-pins-2 {
> +		pinctrl-single,pins = <0x5c 1>;
> +		pinctrl-single,drive-strength = <0x1800 0x1800>;
> +		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
> +		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
> +		pinctrl-single,low-power-mode = <0x288 0x388>;
> +	};

Sorry, these got mixed in by accident and should be in a separate future
patch enabling the eMMC support. I will drop them from here when I send
the next version.

K. B.