[PATCH 3/3] arm64: dts: rockchip: Enable the NPU on the orangepi 5 boards

[Ondřej Jirman]

Hello Maud,

On Sat, Aug 23, 2025 at 02:43:52PM +0200, Maud Spierings via B4 Relay wrote:
> From: Maud Spierings <maud_spierings at hotmail.com>
> 
> Enable the NPU and the PMIC that powers it.

Reviewed-by: Ondřej Jirman <megi at xff.cz>

> Signed-off-by: Maud Spierings <maud_spierings at hotmail.com>
> ---
>  .../arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi | 56 ++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
> index 91d56c34a1e456e18db31e1bbe7252b7e4632588..ac1df223d6a25f3059ce33970953745e402ef695 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
> @@ -258,6 +258,28 @@ regulator-state-mem {
>  	};
>  };
>  
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1m2_xfer>;
> +	status = "okay";
> +
> +	vdd_npu_s0: regulator at 42 {
> +		compatible = "rockchip,rk8602";
> +		reg = <0x42>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_npu_s0";
> +		regulator-boot-on;
> +		regulator-min-microvolt = <550000>;
> +		regulator-max-microvolt = <950000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +};
> +
>  &i2c6 {
>  	clock-frequency = <400000>;
>  	status = "okay";
> @@ -352,6 +374,40 @@ &pd_gpu {
>  	domain-supply = <&vdd_gpu_s0>;
>  };
>  
> +&pd_npu {
> +	domain-supply = <&vdd_npu_s0>;
> +};
> +
> +&rknn_core_0 {
> +	npu-supply = <&vdd_npu_s0>;
> +	sram-supply = <&vdd_npu_s0>;
> +	status = "okay";
> +};
> +
> +&rknn_core_1 {
> +	npu-supply = <&vdd_npu_s0>;
> +	sram-supply = <&vdd_npu_s0>;
> +	status = "okay";
> +};
> +
> +&rknn_core_2 {
> +	npu-supply = <&vdd_npu_s0>;
> +	sram-supply = <&vdd_npu_s0>;
> +	status = "okay";
> +};
> +
> +&rknn_mmu_0 {
> +	status = "okay";
> +};
> +
> +&rknn_mmu_1 {
> +	status = "okay";
> +};
> +
> +&rknn_mmu_2 {
> +	status = "okay";
> +};
> +
>  &saradc {
>  	vref-supply = <&vcc_1v8_s0>;
>  	status = "okay";
> 
> -- 
> 2.50.1
> 
>