[PATCH] arm64: dts: broadcom: bcm2712: Add default GIC address cells

[Krzysztof Kozlowski]

Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:

  bcm2712.dtsi:494.4-497.31: Warning (interrupt_map): /axi/pcie at 1000110000:interrupt-map:
    Missing property '#address-cells' in node /soc at 107c000000/interrupt-controller at 7fff9000, using 0 as fallback

Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
   the fourth component "parent unit address", which size is defined by
   '#address-cells' of the node pointed to by the interrupt-parent
   component, is not used (=0)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 0a9212d3106f..940f1c483198 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -270,6 +270,7 @@ gicv2: interrupt-controller at 7fff9000 {
 			      <0x7fffc000 0x2000>,
 			      <0x7fffe000 0x2000>;
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 		};
 
-- 
2.48.1