[PATCH v4 04/13] dt-bindings: display: st,stm32mp25-lvds: add access-controllers property

[Yannick FERTRE]

Hi Raphael,

Thanks for the patch.

Acked-by: Yannick Fertre <yannick.fertre at foss.st.com>

Le 21/08/2025 à 13:08, Raphael Gallais-Pou a écrit :
> access-controllers is an optional property that allows a peripheral to
> refer to one or more domain access controller(s).
>
> This property is added when the peripheral is under the STM32 firewall
> controller.  It allows an accurate representation of the hardware, where
> the peripheral is connected to a firewall bus.  The firewall can then
> check the peripheral accesses before allowing its device to probe.
>
> Acked-by: Rob Herring (Arm) <robh at kernel.org>
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou at foss.st.com>
> ---
>   Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml | 3 +++
>   1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml b/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
> index 74e61d95370c299130410cdaae833514324c3e8f..05a73bbc246a8994b6aabf7c2cd9dca773232be4 100644
> --- a/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
> +++ b/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
> @@ -59,6 +59,9 @@ properties:
>     resets:
>       maxItems: 1
>   
> +  access-controllers:
> +    maxItems: 1
> +
>     ports:
>       $ref: /schemas/graph.yaml#/properties/ports
>   
>