[PATCH] arm64: dts: imx95-19x19-evk: correct the phy setting for flexcan1/2

[Shawn Guo]

On Tue, Aug 19, 2025 at 10:43:37AM +0800, Haibo Chen wrote:
> 1, the phy support up to 8Mbit/s databitrate for CAN FD.
>    refer to product data sheet:
>      https://www.nxp.com/docs/en/data-sheet/TJA1463.pdf
> 2, the standby pin of the phy is ACTIVE_LOW.
> 3, the phy of flexcan2 connect the standby/en pin to PCAL6408 on i2c4 bus.
> 
> Fixes: 02b7adb791e1 ("arm64: dts: imx95-19x19-evk: add adc0 flexcan[1,2] i2c[2,3] uart5 spi3 and tpm3")
> Signed-off-by: Haibo Chen <haibo.chen at nxp.com>

Applied, thanks!