[PATCH v2 4/5] arm64: dts: rp1: Add ethernet DT node

[Stanimir Varbanov]

Add macb GEM ethernet DT node.

Signed-off-by: Stanimir Varbanov <svarbanov at suse.de>
Reviewed-by: Andrew Lunn <andrew at lunn.ch>
---
 arch/arm64/boot/dts/broadcom/rp1-common.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
index 5002a375eb0b..6bdc304c5f24 100644
--- a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
+++ b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
@@ -39,4 +39,20 @@ rp1_gpio: pinctrl at 400d0000 {
 			     <1 IRQ_TYPE_LEVEL_HIGH>,
 			     <2 IRQ_TYPE_LEVEL_HIGH>;
 	};
+
+	rp1_eth: ethernet at 40100000 {
+		compatible = "raspberrypi,rp1-gem";
+		reg = <0x00 0x40100000  0x0 0x4000>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rp1_clocks RP1_CLK_SYS>,
+			 <&rp1_clocks RP1_CLK_SYS>,
+			 <&rp1_clocks RP1_CLK_ETH>,
+			 <&rp1_clocks RP1_CLK_ETH_TSU>;
+		clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
 };
-- 
2.47.0