[PATCH] media: v4l: Fix dereference before NULL check
Chandra Mohan Sundar
chandramohan.explore at gmail.com
Thu Aug 21 20:11:07 PDT 2025
Hi Sakari Ailus,
Thanks a lot for your review and suggestions. Sure, I will choose an
appropriate subject.
Thanks,
Chandra Mohan Sundar
On Thu, Aug 21, 2025 at 10:57 PM Sakari Ailus <sakari.ailus at iki.fi> wrote:
>
> Hi Chandra,
>
> Please choose an appropriate subject on the next time, this is missing what
> the patch is for -- see git log if in doubt.
>
> On Mon, Aug 18, 2025 at 03:01:57PM +0530, Chandra Mohan Sundar wrote:
> > In 'stm32_csi_start', 'csidev->s_subdev' is dereferenced directly while
> > assigning a value to the 'src_pad'. However the same value is being
> > checked against NULL at a later point of time indicating that there
> > are chances that the value can be NULL.
> >
> > Move the dereference after the NULL check.
> >
> > Fixes: e7bad98c205d1 ("media: v4l: Convert the users of v4l2_get_link_freq to call it on a pad")
>
> Fixes: requires Cc: stable. I've fixed these this time. See
> Documentation/process/submitting-patches.rst .
>
> > Signed-off-by: Chandra Mohan Sundar <chandramohan.explore at gmail.com>
> > ---
> > drivers/media/platform/st/stm32/stm32-csi.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/media/platform/st/stm32/stm32-csi.c b/drivers/media/platform/st/stm32/stm32-csi.c
> > index b69048144cc1..fd2b6dfbd44c 100644
> > --- a/drivers/media/platform/st/stm32/stm32-csi.c
> > +++ b/drivers/media/platform/st/stm32/stm32-csi.c
> > @@ -443,8 +443,7 @@ static void stm32_csi_phy_reg_write(struct stm32_csi_dev *csidev,
> > static int stm32_csi_start(struct stm32_csi_dev *csidev,
> > struct v4l2_subdev_state *state)
> > {
> > - struct media_pad *src_pad =
> > - &csidev->s_subdev->entity.pads[csidev->s_subdev_pad_nb];
> > + struct media_pad *src_pad;
> > const struct stm32_csi_mbps_phy_reg *phy_regs = NULL;
> > struct v4l2_mbus_framefmt *sink_fmt;
> > const struct stm32_csi_fmts *fmt;
> > @@ -466,6 +465,7 @@ static int stm32_csi_start(struct stm32_csi_dev *csidev,
> > if (!csidev->s_subdev)
> > return -EIO;
> >
> > + src_pad = &csidev->s_subdev->entity.pads[csidev->s_subdev_pad_nb];
> > link_freq = v4l2_get_link_freq(src_pad,
> > fmt->bpp, 2 * csidev->num_lanes);
> > if (link_freq < 0)
>
> --
> Regards,
>
> Sakari Ailus
More information about the linux-arm-kernel
mailing list