[PATCH v2 00/12] Misc fixups and changes for Kontron i.MX8M and i.MX93 DTs

[Shawn Guo]

On Mon, Jul 21, 2025 at 12:05:34PM +0200, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf at kontron.de>
> 
> This is a collection of changes for several Kontron ARM64
> board devicetrees. Some are related to hardware changes,
> some are bugfixes and some are improvements.
> 
> Changes for v2:
> * fix touchscreen node name
> * add touchscreen labels
> * fix commit message for RTC interrupt patch
> 
> Annette Kobou (3):
>   arm64: dts: imx8mm-kontron: Add overlay for LTE extension board
>   arm64: dts: imx8mp-kontron: Fix CAN_ADDR0 and CAN_ADDR1 GPIOs
>   arm64: dts: imx93-kontron: Fix GPIO for panel regulator
> 
> Eberhard Stoll (1):
>   arm64: dts: imx8mm-kontron: Use GPIO for RS485 transceiver control
> 
> Frieder Schrempf (7):
>   arm64: dts: imx8mm-kontron: Remove unused regulator
>   arm64: dts: imx8mm-kontron: Sort reg nodes alphabetically
>   arm64: dts: imx8mm-kontron: Name USB regulators according to OSM
>     scheme
>   arm64: dts: imx8mp-kontron: Fix GPIO labels for latest BL board
>   arm64: dts: imx8mp-kontron: Fix USB hub reset
>   arm64: dts: imx93-kontron: Add RTC interrupt signal
>   arm64: dts: imx93-kontron: Fix USB port assignment
> 
> Oualid Derouiche (1):
>   arm64: dts: imx8mm-kontron: Add Sitronix touch controller in DL
>     devicetree

Applied all, thanks!