[PATCH v2] ARM64: dts: mcbin: fix SATA ports on Macchiatobin

[Frank Wunderlich]

Am 21. August 2025 20:06:20 MESZ schrieb "Russell King (Oracle)" <linux at armlinux.org.uk>:
>On Thu, Aug 21, 2025 at 06:43:28PM +0100, Russell King (Oracle) wrote:
>> Booting 6.16 on the Macchiatobin, I discover that I can no longer
>> access my disks, and thus the userspace boot fails. The cause appears
>> to be that one of the SATA controllers doesn't have any ports:
>> 
>> [    1.190312] ahci f4540000.sata: supply ahci not found, using dummy regulator
>> [    1.196255] ahci f4540000.sata: supply phy not found, using dummy regulator
>> [    1.202026] ahci f4540000.sata: No port enabled
>> 
>> This is as a result of the blamed commit below which added a default
>> disabled status to the .dtsi, but didn't properly update the mcbin
>> dtsi file. Fix this regression.
>> 
>> Fixes: 30023876aef4 ("arm64: dts: marvell: only enable complete sata nodes")
>> Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
>
>Frank,
>
>I think this is also similarly broken by your patch:
>
>arch/arm64/boot/dts/marvell/armada-8040-db.dts
>
>as you've updated the ports on one SATA controller but not the other
>in the same way as you omitted the second controller on mcbin.
>
>I'd also question this:
>
>arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
>
>as you updated the other cn9132, but not this one which was introduced
>in 6.11, and your change was in 6.13. Please can you look at both of
>these and send appropriate fixes?
>
>Thanks.
>

Hi,

I sent it at least twice..maybe this new was added in between.
But i have no marvell board for testing so i cannot verify my changes are correct.
I only tried to fix binding errors.
regards Frank