[PATCH] ARM64: dts: mcbin: fix SATA ports on Macchiatobin

[Russell King (Oracle)]

Booting 6.16 on the Macchiatobin, I discover that I can no longer
access my disks, and thus the userspace boot fails. The cause appears
to be that one of the SATA controllers doesn't have any ports:

[    1.190312] ahci f4540000.sata: supply ahci not found, using dummy regulator
[    1.196255] ahci f4540000.sata: supply phy not found, using dummy regulator
[    1.202026] ahci f4540000.sata: No port enabled

This is as a result of the blamed commit below which added a default
disabled status to the .dtsi, but didn't properly update the mcbin
dtsi file. Fix this regression.

Fixes: 30023876aef4 arm64: dts: marvell: only enable complete sata nodes
Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 6170ca8f908f..8c7db2e87e30 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -388,11 +388,13 @@ &cp1_sata0 {
 	/* CPS Lane 1 - U32 */
 	sata-port at 0 {
 		phys = <&cp1_comphy1 0>;
+		status = "okay";
 	};
 
 	/* CPS Lane 3 - U31 */
 	sata-port at 1 {
 		phys = <&cp1_comphy3 1>;
+		status = "okay";
 	};
 };
 
-- 
2.30.2