[PATCH v3 1/2] phy: add new phy_notify_state() api

[Vinod Koul]

On 13-08-25, 16:00, Peter Griffin wrote:
> Add a new phy_notify_state() api that notifies and configures a phy for a
> given state transition.
> 
> This is intended to be by phy drivers which need to do some runtime
                    ^^^^^^^^^^
Missing 'used' possibly? 

> configuration of parameters that can't be handled by phy_calibrate() or
> phy_power_{on|off}().
> 
> The first usage of this API is in the Samsung UFS phy that needs to issue
> some register writes when entering and exiting the hibernate link state.
> 
> Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
> ---
>  drivers/phy/phy-core.c  | 25 +++++++++++++++++++++++++
>  include/linux/phy/phy.h | 19 +++++++++++++++++++
>  2 files changed, 44 insertions(+)
> 
> diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
> index 04a5a34e7a950ae94fae915673c25d476fc071c1..60be8af984bf06649ef00e695d0ed4ced597cdb9 100644
> --- a/drivers/phy/phy-core.c
> +++ b/drivers/phy/phy-core.c
> @@ -520,6 +520,31 @@ int phy_notify_disconnect(struct phy *phy, int port)
>  }
>  EXPORT_SYMBOL_GPL(phy_notify_disconnect);
>  
> +/**
> + * phy_notify_state() - phy state notification
> + * @phy: the PHY returned by phy_get()
> + * @state: the PHY state
> + *
> + * Notify the PHY of a state transition. Used to notify and
> + * configure the PHY accordingly.
> + *
> + * Returns: %0 if successful, a negative error code otherwise
> + */
> +int phy_notify_state(struct phy *phy, union phy_notify state)
> +{
> +	int ret;
> +
> +	if (!phy || !phy->ops->notify_phystate)
> +		return 0;
> +
> +	mutex_lock(&phy->mutex);
> +	ret = phy->ops->notify_phystate(phy, state);
> +	mutex_unlock(&phy->mutex);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(phy_notify_state);
> +
>  /**
>   * phy_configure() - Changes the phy parameters
>   * @phy: the phy returned by phy_get()
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index 13add0c2c40721fe9ca3f0350d13c035cd25af45..664d0864c3a5042949cb121e982368fe0a97827f 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -53,6 +53,15 @@ enum phy_media {
>  	PHY_MEDIA_DAC,
>  };
>  
> +enum phy_ufs_state {
> +	PHY_UFS_HIBERN8_ENTER,
> +	PHY_UFS_HIBERN8_EXIT,
> +};
> +
> +union phy_notify {
> +	enum phy_ufs_state ufs_state;
> +};
> +
>  /**
>   * union phy_configure_opts - Opaque generic phy configuration
>   *
> @@ -83,6 +92,7 @@ union phy_configure_opts {
>   * @set_speed: set the speed of the phy (optional)
>   * @reset: resetting the phy
>   * @calibrate: calibrate the phy
> + * @notify_phystate: notify and configure the phy for a particular state
>   * @release: ops to be performed while the consumer relinquishes the PHY
>   * @owner: the module owner containing the ops
>   */
> @@ -132,6 +142,7 @@ struct phy_ops {
>  	int	(*connect)(struct phy *phy, int port);
>  	int	(*disconnect)(struct phy *phy, int port);
>  
> +	int	(*notify_phystate)(struct phy *phy, union phy_notify state);
>  	void	(*release)(struct phy *phy);
>  	struct module *owner;
>  };
> @@ -255,6 +266,7 @@ int phy_reset(struct phy *phy);
>  int phy_calibrate(struct phy *phy);
>  int phy_notify_connect(struct phy *phy, int port);
>  int phy_notify_disconnect(struct phy *phy, int port);
> +int phy_notify_state(struct phy *phy, union phy_notify state);
>  static inline int phy_get_bus_width(struct phy *phy)
>  {
>  	return phy->attrs.bus_width;
> @@ -412,6 +424,13 @@ static inline int phy_notify_disconnect(struct phy *phy, int index)
>  	return -ENOSYS;
>  }
>  
> +static inline int phy_notify_phystate(struct phy *phy, union phy_notify state)
> +{
> +	if (!phy)
> +		return 0;
> +	return -ENOSYS;

Should be -ENOSYS either way, right?

-- 
~Vinod