[PATCH v2 2/3] arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C

[Chukun Pan]

Hi,

> How about the following instead?
>
> @@ -538,7 +538,7 @@ regulator-state-mem {
> 				};
> 			};
>
> -			vcc_3v3_s3: dcdc-reg8 {
> +			vcc_3v3_pmu: vcc_3v3_s3: dcdc-reg8 {
> 				regulator-name = "vcc_3v3_s3";
> 				regulator-always-on;
> 				regulator-boot-on;

On rk356x, the Flash chip is usually powered by VCCIO_FLASH, which
is also connected through a 0 ohm resistor, so I didn't write like
this. e.g. https://github.com/torvalds/linux/commit/a706a593cb19

Thanks,
Chukun

--
2.25.1