[PATCH v4 3/6] arm64: dts: qcom: qcs615: add ethernet node

[YijieYang]

From: Yijie Yang <quic_yijiyang at quicinc.com>

Add an ethernet controller node for QCS615 SoC to enable ethernet
functionality.

Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
Signed-off-by: Yijie Yang <quic_yijiyang at quicinc.com>
---
 arch/arm64/boot/dts/qcom/sm6150.dtsi | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6150.dtsi b/arch/arm64/boot/dts/qcom/sm6150.dtsi
index 591fcb740259..8ec97532911c 100644
--- a/arch/arm64/boot/dts/qcom/sm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6150.dtsi
@@ -491,6 +491,39 @@ soc: soc at 0 {
 		dma-ranges = <0 0 0 0 0x10 0>;
 		#address-cells = <2>;
 		#size-cells = <2>;
+		ethernet: ethernet at 20000 {
+			compatible = "qcom,qcs615-ethqos", "qcom,qcs404-ethqos";
+			reg = <0x0 0x00020000 0x0 0x10000>,
+			      <0x0 0x00036000 0x0 0x100>;
+			reg-names = "stmmaceth",
+				    "rgmii";
+
+			clocks = <&gcc GCC_EMAC_AXI_CLK>,
+				 <&gcc GCC_EMAC_SLV_AHB_CLK>,
+				 <&gcc GCC_EMAC_PTP_CLK>,
+				 <&gcc GCC_EMAC_RGMII_CLK>;
+			clock-names = "stmmaceth",
+				      "pclk",
+				      "ptp_ref",
+				      "rgmii";
+
+			interrupts = <GIC_SPI 660 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq",
+					  "eth_lpi";
+
+			power-domains = <&gcc EMAC_GDSC>;
+			resets = <&gcc GCC_EMAC_BCR>;
+
+			iommus = <&apps_smmu 0x1c0 0x0>;
+
+			snps,tso;
+			snps,pbl = <32>;
+			rx-fifo-depth = <16384>;
+			tx-fifo-depth = <20480>;
+
+			status = "disabled";
+		};
 
 		gcc: clock-controller at 100000 {
 			compatible = "qcom,qcs615-gcc";

-- 
2.34.1