[PATCH 04/15] ARM: dts: ls1021a: remove big-endian for memory-controller node

[Frank Li]

According to binding doc memory-controllers/fsl/fsl,ddr.yaml, default it is
big-endian.

Fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/ls/ls1021a-iot.dtb: memory-controller at 1080000 (fsl,qoriq-memory-controller): 'big-endian' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm/boot/dts/nxp/ls/ls1021a.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
index ba354c48a9cb4c962599925017828a089fc5a4eb..a4c16833dff0f33d0093a7d1575a9c67c94aa1af 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
@@ -93,7 +93,6 @@ ddr: memory-controller at 1080000 {
 			compatible = "fsl,qoriq-memory-controller";
 			reg = <0x0 0x1080000 0x0 0x1000>;
 			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-			big-endian;
 		};
 
 		gic: interrupt-controller at 1400000 {

-- 
2.34.1