[RFC PATCH 0/3] Add DSI and Raspberry Pi panel support

[Harikrishna Shenoy]

This series adds support for enabling DSI output and attaching a Raspberry
Pi 7-inch panel on the BeagleBone AI-64 (J721e).
The patches include:
1. Bindings- Extend panel-simple bindings to allow the
Raspberry Pi panel to bedescribed.
2. SoC integration- Add DSI and DPHY TX nodes for J721e main domain.
3. Board integration -Hook up the Raspberry Pi 7-inch panel to the 
BeagleBone AI-64 using the DSI interface.

Harikrishna Shenoy (2):
  devicetree: bindings: dsiplay: panel: panel-simple.yaml: Add Raspberry
    pi dsi panel compatible
  arm64: dts: ti: k3-j721e-beagleboneai64: Add DSI RPi Panel

Rahul T R (1):
  arm64: dts: ti: k3-j721e-main: Add DSI and DPHY-TX

 .../bindings/display/panel/panel-simple.yaml  |   2 +
 arch/arm64/boot/dts/ti/Makefile               |   4 +
 ...1e-beagleboneai64-dsi-rpi-7inch-panel.dtso | 141 ++++++++++++++++++
 .../boot/dts/ti/k3-j721e-beagleboneai64.dts   |   7 +-
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     |  31 ++++
 5 files changed, 184 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64-dsi-rpi-7inch-panel.dtso

-- 
2.34.1