[RESEND v3 5/5] PCI: dwc: Don't return error when wait for link up

[Bjorn Helgaas]

On Mon, Aug 18, 2025 at 03:32:05PM +0800, Richard Zhu wrote:
> When waiting for the PCIe link to come up, both link up and link down
> are valid results depending on the device state. Do not return an error,
> as the outcome has already been reported in dw_pcie_wait_for_link().

The reporting in dw_pcie_wait_for_link() is only a note in dmesg (and
the -EDTIMEDOUT return, which we're throwing away here).

We need an explanation here about why the caller of
dw_pcie_resume_noirq() doesn't need to know whether the link came up.
A short comment in the code would be useful as well.

> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> Reviewed-by: Frank Li <Frank.Li at nxp.com>
> ---
>  drivers/pci/controller/dwc/pcie-designware-host.c | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index 868e7db4e3381..e90fd34925702 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -1089,9 +1089,7 @@ int dw_pcie_resume_noirq(struct dw_pcie *pci)
>  	if (ret)
>  		return ret;
>  
> -	ret = dw_pcie_wait_for_link(pci);
> -	if (ret)
> -		return ret;
> +	dw_pcie_wait_for_link(pci);
>  
>  	return ret;

This should be "return 0" because if "ret" was non-zero, we returned
that earlier.

>  }
> -- 
> 2.37.1
>