[PATCH 2/2] arm64: dts: rockchip: Fix Bluetooth interrupts flag on Neardi LBA3368

[Krzysztof Kozlowski]

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.

Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
  ACTIVE_HIGH  => IRQ_TYPE_LEVEL_HIGH

Fixes: 7b4a8097e58b ("arm64: dts: rockchip: Add Neardi LBA3368 board")
Cc: <stable+noautosel at kernel.org> # Needs testing, because actual level is just a guess
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

---

Please kindly test... Not cc-ing stable on purpose, because this might
have impact, so needs actual testing.
---
 arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts b/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts
index b99bb0a5f900..b9801a691b48 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts
@@ -609,7 +609,7 @@ &uart0 {
 
 	bluetooth {
 		compatible = "brcm,bcm4345c5";
-		interrupts-extended = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+		interrupts-extended = <&gpio3 RK_PA7 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "host-wakeup";
 		clocks = <&rk808 RK808_CLKOUT1>;
 		clock-names = "lpo";
-- 
2.48.1