[PATCH v2 03/12] dt-bindings: media: nxp: Add support for FSD SoC

[Inbaraj E]

Document the MIPI CSI2 controller device tree bindings for Tesla
FSD SoC

Signed-off-by: Inbaraj E <inbaraj.e at samsung.com>
---
 .../bindings/media/nxp,imx-mipi-csi2.yaml     | 88 ++++++++++++++-----
 1 file changed, 68 insertions(+), 20 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
index 03a23a26c4f3..802fb1bd150d 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
@@ -14,7 +14,7 @@ description: |-
   The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2
   receiver IP core named CSIS. The IP core originates from Samsung, and may be
   compatible with some of the Exynos4 and S5P SoCs. i.MX7 SoCs use CSIS version
-  3.3, and i.MX8 SoCs use CSIS version 3.6.3.
+  3.3, i.MX8 SoCs use CSIS version 3.6.3 and FSD SoC uses CSIS version 4.3.
 
   While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is
   completely wrapped by the CSIS and doesn't expose a control interface of its
@@ -26,6 +26,7 @@ properties:
       - enum:
           - fsl,imx7-mipi-csi2
           - fsl,imx8mm-mipi-csi2
+          - tesla,fsd-mipi-csi2
       - items:
           - enum:
               - fsl,imx8mp-mipi-csi2
@@ -38,24 +39,21 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 3
-    items:
-      - description: The peripheral clock (a.k.a. APB clock)
-      - description: The external clock (optionally used as the pixel clock)
-      - description: The MIPI D-PHY clock
-      - description: The AXI clock
+    minItems: 2
+    maxItems: 4
 
   clock-names:
-    minItems: 3
-    items:
-      - const: pclk
-      - const: wrap
-      - const: phy
-      - const: axi
+    minItems: 2
+    maxItems: 4
 
   power-domains:
     maxItems: 1
 
+  samsung,syscon-csis:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Syscon used to hold and release the reset of MIPI D-PHY
+
   phy-supply:
     description: The MIPI D-PHY digital power supply
 
@@ -85,7 +83,8 @@ properties:
             properties:
               data-lanes:
                 description:
-                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
+                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data
+                  lines.
                 minItems: 1
                 items:
                   - const: 1
@@ -107,7 +106,6 @@ required:
   - interrupts
   - clocks
   - clock-names
-  - power-domains
   - ports
 
 additionalProperties: false
@@ -116,20 +114,70 @@ allOf:
   - if:
       properties:
         compatible:
-          contains:
-            const: fsl,imx7-mipi-csi2
+          const: fsl,imx7-mipi-csi2
     then:
+      properties:
+        clocks:
+          items:
+            - description: The peripheral clock (a.k.a. APB clock)
+            - description: The external clock (optionally used as the pixel
+                clock)
+            - description: The MIPI D-PHY clock
+        clock-names:
+          items:
+            - const: pclk
+            - const: wrap
+            - const: phy
+        samsung,syscon-csis: false
       required:
+        - power-domains
         - phy-supply
         - resets
-    else:
+
+  - if:
+      properties:
+        compatible:
+          const: fsl,imx8mm-mipi-csi2
+    then:
       properties:
         clocks:
-          minItems: 4
+          items:
+            - description: The peripheral clock (a.k.a. APB clock)
+            - description: The external clock (optionally used as the pixel
+                clock)
+            - description: The MIPI D-PHY clock
+            - description: The AXI clock
         clock-names:
-          minItems: 4
+          items:
+            - const: pclk
+            - const: wrap
+            - const: phy
+            - const: axi
+        samsung,syscon-csis: false
         phy-supply: false
         resets: false
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          const: tesla,fsd-mipi-csi2
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The peripheral clock (a.k.a. APB clock)
+            - description: The DMA clock
+        clocks-names:
+          items:
+            - const: pclk
+            - const: aclk
+        phy-supply: false
+        resets: false
+        power-domains: false
+      required:
+        - samsung,syscon-csis
 
 examples:
   - |
-- 
2.49.0