[PATCH v2 0/2] Keep imx93 ADC works even calibration failed.

[Jonathan Cameron]

On Tue, 12 Aug 2025 16:04:21 +0800
Haibo Chen <haibo.chen at nxp.com> wrote:

> imx93 ADC calibration has requirement for reference voltage:
>   ADC reference voltage Noise < 1.8V * 1/2^ENOB
> 
> Some boards can't meet such requirement, ADC calibration failed on these
> boards, and adc can't be used. This is not appropriate, board can't meet
> this requirement do not means ADC can't work, just means ADC can't work
> that accurate. Here add an optimization, keep adc works even calibration
> failed.
> 
> Changes in V2:
> - add patch 1 to keep one style of the hex values according to
>   Andy Shevchenko's suggestion.
> - keep {} when give the calibration failed warning log.
> 
> For the register 0x3A0, it is a new added register in latest imx93 RM,
> please refer to this link:
> https://www.nxp.com/products/processors-and-microcontrollers/arm-processors/i-mx-applications-processors/i-mx-9-processors/i-mx-93-applications-processor-family-arm-cortex-a55-ml-acceleration-power-efficient-mpu:i.MX93
> 
> Patch v1 also pass test on one customer board, refer to this topic:
> https://patchwork.kernel.org/project/linux-iio/patch/20250710073905.1105417-2-primoz.fiser@norik.com/
> 
> Signed-off-by: Haibo Chen <haibo.chen at nxp.com>
Series applied to the togreg branch of iio.git.

I'll push that out as testing to get a bit of build coverage before
risking letting next see it.

Thanks,

Jonathan

> ---
> Haibo Chen (2):
>       iio: adc: imx93_adc: keep one style of the hex values
>       iio: adc: imx93_adc: load calibrated values even calibration failed
> 
>  drivers/iio/adc/imx93_adc.c | 22 +++++++++++++++++-----
>  1 file changed, 17 insertions(+), 5 deletions(-)
> ---
> base-commit: 2674d1eadaa2fd3a918dfcdb6d0bb49efe8a8bb9
> change-id: 20250812-adc-839e49d55da9
> 
> Best regards,