[PATCH v14 09/10] arm64: dts: qcom: qcs6490-rb3gen2: Add PSCI SYSTEM_RESET2 types

[Shivendra Pratap]

From: Elliot Berman <elliot.berman at oss.qualcomm.com>

Add support for SYSTEM_RESET2 vendor-specific resets in
qcs6490-rb3gen2 as reboot-modes.  Describe the resets:
"bootloader" will cause device to reboot and stop in the
bootloader's fastboot mode. "edl" will cause device to reboot
into "emergency download mode", which permits loading images via
the Firehose protocol.

Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
Signed-off-by: Elliot Berman <elliot.berman at oss.qualcomm.com>
Signed-off-by: Shivendra Pratap <shivendra.pratap at oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 7509c27bd3f8f3e43877ded3b898205bdb66a847..621628311a3e36cea70697872b63282d1ba83e1d 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -966,6 +966,13 @@ &pon_resin {
 	status = "okay";
 };
 
+&psci {
+	reboot-mode {
+		mode-bootloader = <0x10001 0x2>;
+		mode-edl = <0 0x1>;
+	};
+};
+
 &qup_uart7_cts {
 	/*
 	 * Configure a bias-bus-hold on CTS to lower power

-- 
2.34.1