[PATCH v3 3/7] media: qcom: camss: Add CSIPHY support for QCS8300

Bryan O'Donoghue bryan.odonoghue at linaro.org
Wed Aug 13 14:32:11 PDT 2025


On 13/08/2025 06:37, Vikram Sharma wrote:
> QCS8300 uses the same CSIPHY hardware version (v1.3.0) as
> SA8775P. The only difference between the two platforms is
> the number of CSIPHY instances: SA8775P has four, while
> QCS8300 has three.
> 
> Signed-off-by: Vikram Sharma <quic_vikramsa at quicinc.com>
> ---
>   .../qcom/camss/camss-csiphy-3ph-1-0.c         |  2 +
>   drivers/media/platform/qcom/camss/camss.c     | 57 +++++++++++++++++++
>   2 files changed, 59 insertions(+)
> 
> diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> index a610504359d0..445f4d41e847 100644
> --- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> +++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> @@ -826,6 +826,7 @@ static bool csiphy_is_gen2(u32 version)
>   	case CAMSS_7280:
>   	case CAMSS_8250:
>   	case CAMSS_8280XP:
> +	case CAMSS_8300:
>   	case CAMSS_845:
>   	case CAMSS_8550:
>   	case CAMSS_8775P:
> @@ -928,6 +929,7 @@ static int csiphy_init(struct csiphy_device *csiphy)
>   		regs->lane_array_size = ARRAY_SIZE(lane_regs_sm8550);
>   		regs->offset = 0x1000;
>   		break;
> +	case CAMSS_8300:
>   	case CAMSS_8775P:
>   		regs->lane_regs = &lane_regs_sa8775p[0];
>   		regs->lane_array_size = ARRAY_SIZE(lane_regs_sa8775p);
> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
> index 6b9aba1029b5..410e188d26aa 100644
> --- a/drivers/media/platform/qcom/camss/camss.c
> +++ b/drivers/media/platform/qcom/camss/camss.c
> @@ -2483,6 +2483,63 @@ static const struct resources_icc icc_res_sm8550[] = {
>   	},
>   };
>   
> +static const struct camss_subdev_resources csiphy_res_8300[] = {
> +	/* CSIPHY0 */
> +	{
> +		.regulators = { "vdda-phy", "vdda-pll" },
> +
> +		.clock = { "csiphy_rx", "csiphy0", "csiphy0_timer" },
> +		.clock_rate = {
> +			{ 400000000 },
> +			{ 0 },
> +			{ 400000000 },
> +		},
> +		.reg = { "csiphy0" },
> +		.interrupt = { "csiphy0" },
> +		.csiphy = {
> +			.id = 0,
> +			.hw_ops = &csiphy_ops_3ph_1_0,
> +			.formats = &csiphy_formats_sdm845,
> +		}
> +	},
> +	/* CSIPHY1 */
> +	{
> +		.regulators = { "vdda-phy", "vdda-pll" },
> +
> +		.clock = { "csiphy_rx", "csiphy1", "csiphy1_timer" },
> +		.clock_rate = {
> +			{ 400000000 },
> +			{ 0 },
> +			{ 400000000 },
> +		},
> +		.reg = { "csiphy1" },
> +		.interrupt = { "csiphy1" },
> +		.csiphy = {
> +			.id = 1,
> +			.hw_ops = &csiphy_ops_3ph_1_0,
> +			.formats = &csiphy_formats_sdm845,
> +		}
> +	},
> +	/* CSIPHY2 */
> +	{
> +		.regulators = { "vdda-phy", "vdda-pll" },
> +
> +		.clock = { "csiphy_rx", "csiphy2", "csiphy2_timer" },
> +		.clock_rate = {
> +			{ 400000000 },
> +			{ 0 },
> +			{ 400000000 },
> +		},
> +		.reg = { "csiphy2" },
> +		.interrupt = { "csiphy2" },
> +		.csiphy = {
> +			.id = 2,
> +			.hw_ops = &csiphy_ops_3ph_1_0,
> +			.formats = &csiphy_formats_sdm845,
> +		}
> +	},
> +};
> +
>   static const struct camss_subdev_resources csiphy_res_8775p[] = {
>   	/* CSIPHY0 */
>   	{
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>



More information about the linux-arm-kernel mailing list