[PATCH v2 64/72] ARM: dts: samsung: exynos4412-midas: Replace clock-frequency in camera sensor node

[Laurent Pinchart]

The clock-frequency for camera sensors has been deprecated in favour of
the assigned-clocks and assigned-clock-rates properties. Replace it in
the device tree.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
This patch can be merged independently from the previous clock handling
refactoring in the driver ("media: i2c: s5k6a3: Use V4L2 legacy sensor
clock helper").

Without the driver change, when the clock-frequency property is not set,
the driver defaults to a fixed 24MHz value. That is the frequency set in
DT for this board, so the resulting clock frequency does not change.
---
 arch/arm/boot/dts/samsung/exynos4412-midas.dtsi | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
index 05ddddb565ee..3cd027a99369 100644
--- a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
@@ -638,10 +638,13 @@ image-sensor at 10 {
 		svdda-supply = <&cam_io_reg>;
 		svddio-supply = <&ldo19_reg>;
 		afvdd-supply = <&ldo19_reg>;
-		clock-frequency = <24000000>;
+
 		/* CAM_B_CLKOUT */
 		clocks = <&camera 1>;
 		clock-names = "extclk";
+		assigned-clocks = <&camera 1>;
+		assigned-clock-rates = <24000000>;
+
 		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
 
 		port {
-- 
Regards,

Laurent Pinchart