[PATCH 05/11] phy: rockchip: inno-usb2: Add support for RK3528

[Vinod Koul]

On 23-07-25, 12:23, Jonas Karlman wrote:
> From: Jianwei Zheng <jianwei.zheng at rock-chips.com>

Please do not send encrypted emails over public mail lists

> 
> The RK3528 has a single USB2PHY with a otg and host port.
> 
> Add support for the RK3528 variant of USB2PHY.
> 
> PHY tuning for RK3528:
> 
> - Turn off differential receiver in suspend mode to save power
>   consumption.
> 
> - Set HS eye-height to 400mV instead of default 450mV.
> 
> - Choose the Tx fs/ls data as linestate from TX driver for otg port
>   which uses dwc3 controller to improve fs/ls devices compatibility with
>   long cables.
> 
> This is based on vendor kernel linux-stan-6.1-rkr5 tag.
> 
> Signed-off-by: Jianwei Zheng <jianwei.zheng at rock-chips.com>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> ---
>  drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 74 +++++++++++++++++++
>  1 file changed, 74 insertions(+)
> 
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> index cd1a02b990ef..b8950d9f9e97 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> @@ -1507,6 +1507,28 @@ static int rk3128_usb2phy_tuning(struct rockchip_usb2phy *rphy)
>  				BIT(2) << BIT_WRITEABLE_SHIFT | 0);
>  }
>  
> +static int rk3528_usb2phy_tuning(struct rockchip_usb2phy *rphy)
> +{
> +	int ret = 0;

Superfluous init

> +
> +	/* Turn off otg port differential receiver in suspend mode */
> +	ret |= regmap_write(rphy->phy_base, 0x30, BIT(18) | 0x0000);
> +
> +	/* Turn off host port differential receiver in suspend mode */
> +	ret |= regmap_write(rphy->phy_base, 0x430, BIT(18) | 0x0000);
> +
> +	/* Set otg port HS eye height to 400mv (default is 450mv) */
> +	ret |= regmap_write(rphy->phy_base, 0x30, GENMASK(22, 20) | 0x0000);
> +
> +	/* Set host port HS eye height to 400mv (default is 450mv) */
> +	ret |= regmap_write(rphy->phy_base, 0x430, GENMASK(22, 20) | 0x0000);
> +
> +	/* Choose the Tx fs/ls data as linestate from TX driver for otg port */
> +	ret |= regmap_write(rphy->phy_base, 0x94, GENMASK(22, 19) | 0x0018);

No error checking?

-- 
~Vinod