[PATCH net v2] net: stmmac: rk: put the PHY clock on remove

[Russell King (Oracle)]

The PHY clock (bsp_priv->clk_phy) is obtained using of_clk_get(), which
doesn't take part in the devm release. Therefore, when a device is
unbound, this clock needs to be explicitly put. Fix this.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
Spotted this resource leak while making other changes to dwmac-rk.
Would be great if the dwmac-rk maintainers can test it.

v2: fix build error

 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 79b92130a03f..f6687c2f30f6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -1765,11 +1765,15 @@ static int rk_gmac_probe(struct platform_device *pdev)
 
 static void rk_gmac_remove(struct platform_device *pdev)
 {
-	struct rk_priv_data *bsp_priv = get_stmmac_bsp_priv(&pdev->dev);
+	struct stmmac_priv *priv = netdev_priv(platform_get_drvdata(pdev));
+	struct rk_priv_data *bsp_priv = priv->plat->bsp_priv;
 
 	stmmac_dvr_remove(&pdev->dev);
 
 	rk_gmac_powerdown(bsp_priv);
+
+	if (priv->plat->phy_node && bsp_priv->integrated_phy)
+		clk_put(bsp_priv->clk_phy);
 }
 
 #ifdef CONFIG_PM_SLEEP
-- 
2.30.2