[PATCH RFC 1/5] dt-bindings: clock: marvell,pxa1908: Add simple-mfd, syscon compatible to apmu

[Krzysztof Kozlowski]

On Wed, Aug 06, 2025 at 07:33:20PM +0200, Duje Mihanović wrote:
> Add required syscon and simple-mfd compatibles to the APMU controller.
> This is required for the SoC's power domain controller as the registers
> are shared. The simple-mfd compatible allows devices whose registers are
> completely contained in the APMU range (such as the power domain
> controller and potentially more) to be children of the clock controller
> node.
> 
> Also add an optional power-controller child node to the APMU controller
> to accommodate the new power domain driver.
> 
> Signed-off-by: Duje Mihanović <duje at dujemihanovic.xyz>
> ---
>  .../devicetree/bindings/clock/marvell,pxa1908.yaml | 36 ++++++++++++++++++----
>  1 file changed, 30 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
> index 4e78933232b6b925811425f853bedf6e9f01a27d..5e924ebd97e6457191ac021addafd22caba48964 100644
> --- a/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
> +++ b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
> @@ -19,11 +19,15 @@ description: |
>  
>  properties:
>    compatible:
> -    enum:
> -      - marvell,pxa1908-apbc
> -      - marvell,pxa1908-apbcp
> -      - marvell,pxa1908-mpmu
> -      - marvell,pxa1908-apmu
> +    oneOf:
> +      - enum:
> +          - marvell,pxa1908-apbc
> +          - marvell,pxa1908-apbcp
> +          - marvell,pxa1908-mpmu
> +      - items:
> +          - const: marvell,pxa1908-apmu
> +          - const: simple-mfd
> +          - const: syscon
>  
>    reg:
>      maxItems: 1
> @@ -31,18 +35,38 @@ properties:
>    '#clock-cells':
>      const: 1
>  
> +  power-controller:
> +    description: |
> +      Optional power domain controller node.
> +    type: object
> +    additionalProperties: true
> +    properties:
> +      compatible:
> +        const: marvell,pxa1908-power-controller

I commented on next patch, so oly to re-iterate here: no, don't create
nodes just to instantiate drivers. You do not have any resources here.

Best regards,
Krzysztof